Description
A versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for repairing ferrous and aluminium metal items. It comes in a handy roll form, with the black hardener encapsulated in the grey resin part. The product hardens in 5-10 minutes, after mixing, to a black metal-like material.
Features
Will not sag, run or drip.
Easy to use – no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Can be used under water (but dry surfaces for application are best and recommended).
Rapid Set (less than 10 minutes).
Can be used for fuel resistant repairs.
Appearance
Dries Dark Grey/Charcoal
Where can this product be used?
Rebuilding engine parts and rusted metal etc
Repairing a hole in a fuel tank
Repair of iron pipes, tools and equipment
Repair stripped threads
Forming of nuts and bolts in place
Attaching fixtures and signs
Fixing radiators
Repairing holes in cars and boats
Patching ducts and tanks
Making prototypes
Thread locking
Repair of down pipes and gutters
Anchoring of bolts
Repairing your metal outdoor furniture
Set time increases at temperatures below 20°C
Not recommended for plastic fuel tanks
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon?) or silicone rubber
Not tested for drinking water contact to AS/NZ 4020:2005
What materials is this product suitable for?
Steel
Wide range of terrous metal and aluminium items
Most plastics (pre-test required)
Glass
How to use this product
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Apply with pressure to surface to be repaired (within 2 minutes of mixing) and mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Steel will harden and begin to form a strong bond.
After 60 minutes Knead-It Steel may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
Handy tips
Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from thre knead-it.
To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
Store in a cool place for maximum shelf life
Use Knead-It Multi Purpous for applications in contact with drinking water.
Use Knead-It Aqua for applications in wet/submerged areas.
For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product.
Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup.
Safety tips
Where possible wear protective gloves when using Knead-It Steel. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Storage and re-use
Replace siliver disc to seal ends and keep in a cool dry place.
