Description
Selleys Kwik Grip Gel Vertical Contact Adhesive is a thick, non-drip contact adhesive made for bonding upright and overhead surfaces, supplied here in a 400g can. The gel body stays put where a runny contact cement would sag, so it suits wall-mounted laminates, panels and other large flat pieces that need to grip the moment they meet.
About the formula
A solvent-based polychloroprene contact adhesive in a light amber gel. It works on both absorbent and non-absorbent surfaces. The gel consistency spreads easily with a brush and resists running and stringing. You coat both surfaces, let them become touch-dry, then press them together and the bond grips straight away. Once cured, the bond is water resistant and handles heat up to 130°C. Selleys also notes that the cured adhesive resists dilute acids and alkalis.
Where to use it
Indoors: laminate and veneer onto vertical panels and cabinetry, cork and felt onto walls or boards, rubber and leather trims, canvas and upholstery-type repairs.
Outdoors: weather-exposed fixings on suitable substrates, where a heat and water resistant contact bond is needed.
Suitable materials include cork, rubber, felt, canvas, leather, metals, timber, laminated plastics (such as Laminex and Formica), hardboard and compressed board. Do not use it on polyethylene or polypropylene plastics.
How to use it
Make sure both surfaces are clean and dry before you start. Work in temperatures between 10°C and 35°C. Brush an even coat onto both surfaces, then wait until the adhesive is almost dry to the touch. Press the surfaces together firmly and accurately, because contact adhesives grip on contact and cannot be repositioned afterwards. No clamping is needed. Reseal the can tightly after use.
Important notes
The bond grips immediately but reaches full strength after about 24 hours. Do not apply below 10°C. This adhesive is not suitable for polyethylene or polypropylene. Test a small hidden area first on any sensitive or unusual material, such as foam or soft plastics, as the solvents can affect them.
Specifications
| Brand |
Selleys |
| Product |
Kwik Grip Gel Vertical Contact Adhesive |
| Pack |
400g can |
| Colour |
Light amber |
| Base |
Solvent-based polychloroprene |
| Form |
Non-drip gel |
| Application |
Brush, to both surfaces |
| Application temperature |
10°C to 35°C |
| Set |
Immediate grip on contact |
| Full cure |
24 hours |
| Heat resistance |
Up to 130°C |
| Use |
Interior and exterior |
| Can size (approx.) |
87 x 87 x 116 mm |
Safety
Keep it away from heat, sparks, open flames and other ignition sources, and do not smoke while using it. Use it in a well-ventilated area. Vapour may cause drowsiness or dizziness, and the product can irritate skin and eyes. Wear protective gloves and eye protection. Refer to the Safety Data Sheet (SDS) for full details.
