🚀 FAST DELIVERY AUSTRALIA WIDE

Selleys No More Gaps Coloured Caulk Sealant 450g

Description

No More Gaps Coloured Gaps

No More Gaps Coloured Gaps offers a long-lasting, colour-matched finish, suitable for both interior and exterior use. It comes in a wide range of colours, with no need to paint over (although it is paintable if required). It provides superior flexibility to cope with building movement, hiding cracks and gaps longer, with greater than 350% elongation/stretch and up to +/- 20% movement capability.

Key Features

  • Long-lasting, colour-matched finish
  • Suitable for Interior & Exterior use
  • Available in a great colour range, with no need to paint over (Paintable if required)
  • Superior flexibility to cope with building movement, hiding cracks and gaps longer
  • Greater than 350% elongation/stretch and up to +/- 20% movement capability
  • Good resistance to weathering
  • Superior adhesion to a broad range of surfaces, resulting in a lasting finish
  • Mould and mildew resistant

Where can this product be used?

  • Between window and door frames and the wall
  • Along skirting boards
  • Around cornices
  • Between benchtops and tiles (not exposed to water)
  • In corners or between walls and ceilings
  • Between cabinets and cupboards
  • Around air conditioning vents and the ceiling
  • Where shrinkage or movement has caused rigid fillers to crack
  • Gaps with the maximum width of 25mm and depth of 12mm

What materials is this product suitable for?

  • Timber
  • Brick & Concrete
  • Plasterboard, particleboard & fibre cement sheeting
  • Masonry
  • Ceramic Tiles
  • Glass
  • Aluminium
  • Bare or painted surfaces
  • Colorbond
  • Many other building materials

How to Use

  • Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk.
  • Cut the seal and nozzle, fit it to the top of the cartridge, and insert the cartridge into a caulking gun such as Selleys Light Speed Caulking Gun.
  • Hold the caulking gun at a 45° angle and apply, forcing the product into the gap.
  • Smooth with a wet finger or spatula.
  • Clean up excess with a damp cloth immediately and clean hands and tools with water.
  • Allow surface to skin thoroughly prior to painting with water-based paints. If using oil-based paints or for large gaps, allow the sealant to set for about 24 hours and ensure the product is completely cured.
  • Avoid water contact until fully cured – 72 hours or longer in cold weather.

Limitations

  • Not recommended for foot traffic areas, gaps between tongue and groove boards, or weatherboard overlaps. Use Selleys No More Gaps Timber Flooring Flexible Gap Filler for gaps between tongue and groove boards, and Selleys No More Gaps Exterior & Weatherboard Gap Filler for weatherboard overlaps.
  • Not suitable for areas in prolonged contact with water (e.g., showers, pools, & spas). Use Selleys Silicone Sealant for significant joint movement or areas of frequent water immersion.
  • Do not apply or store below 5°C.

Handy Tips

  • Ensure you tape both sides of the gap before applying the product for a neat finish and easier cleanup.
  • When first applying, extrude a small amount onto scrap material to ensure smooth, continuous flow of gap filler.
  • If wiping off excess with a wet finger, wet it with water (not saliva) to avoid bacteria that can promote mould growth.
  • Allow surfaces to skin before painting, approximately 30 minutes. Protect from rain until the surface is firmly skinned.
  • Some water-based undercoats and flat paints may crack when drying. To reduce this, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting.
  • Keep a pack of Selleys Sugar Soap Wipes handy for easy cleanup.

Clean Up

  • Water-based, so clean up with water.
  • Uncured product may be removed with water.
  • Cured product can be removed by sanding and scraping.

Size

450g Cartridge

Colours

  • Black
  • Brilliant White
  • Brown
  • Cedar
  • Charcoal
  • Coffee
  • Cream
  • Ivory
  • Light Grey

Technology

Water-Based

Use

Interior & Exterior

Selleys No More Gaps Coloured Caulk Sealant 450g

Product form

No More Gaps Coloured Gaps No More Gaps Coloured Gaps offers a long-lasting, colour-matched finish, suitable for both interior and... Read more

In Stock - Ready to ship  Express Post: 1-3 Days | Standard Post: 2-5 Days

$15.10

    • Guaranteed secure & safe checkout.

      paypal
    • Shipped today? Order within: Sep 12, 2025 10:00:00 +1000

    Description

    No More Gaps Coloured Gaps

    No More Gaps Coloured Gaps offers a long-lasting, colour-matched finish, suitable for both interior and exterior use. It comes in a wide range of colours, with no need to paint over (although it is paintable if required). It provides superior flexibility to cope with building movement, hiding cracks and gaps longer, with greater than 350% elongation/stretch and up to +/- 20% movement capability.

    Key Features

    • Long-lasting, colour-matched finish
    • Suitable for Interior & Exterior use
    • Available in a great colour range, with no need to paint over (Paintable if required)
    • Superior flexibility to cope with building movement, hiding cracks and gaps longer
    • Greater than 350% elongation/stretch and up to +/- 20% movement capability
    • Good resistance to weathering
    • Superior adhesion to a broad range of surfaces, resulting in a lasting finish
    • Mould and mildew resistant

    Where can this product be used?

    • Between window and door frames and the wall
    • Along skirting boards
    • Around cornices
    • Between benchtops and tiles (not exposed to water)
    • In corners or between walls and ceilings
    • Between cabinets and cupboards
    • Around air conditioning vents and the ceiling
    • Where shrinkage or movement has caused rigid fillers to crack
    • Gaps with the maximum width of 25mm and depth of 12mm

    What materials is this product suitable for?

    • Timber
    • Brick & Concrete
    • Plasterboard, particleboard & fibre cement sheeting
    • Masonry
    • Ceramic Tiles
    • Glass
    • Aluminium
    • Bare or painted surfaces
    • Colorbond
    • Many other building materials

    How to Use

    • Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk.
    • Cut the seal and nozzle, fit it to the top of the cartridge, and insert the cartridge into a caulking gun such as Selleys Light Speed Caulking Gun.
    • Hold the caulking gun at a 45° angle and apply, forcing the product into the gap.
    • Smooth with a wet finger or spatula.
    • Clean up excess with a damp cloth immediately and clean hands and tools with water.
    • Allow surface to skin thoroughly prior to painting with water-based paints. If using oil-based paints or for large gaps, allow the sealant to set for about 24 hours and ensure the product is completely cured.
    • Avoid water contact until fully cured – 72 hours or longer in cold weather.

    Limitations

    • Not recommended for foot traffic areas, gaps between tongue and groove boards, or weatherboard overlaps. Use Selleys No More Gaps Timber Flooring Flexible Gap Filler for gaps between tongue and groove boards, and Selleys No More Gaps Exterior & Weatherboard Gap Filler for weatherboard overlaps.
    • Not suitable for areas in prolonged contact with water (e.g., showers, pools, & spas). Use Selleys Silicone Sealant for significant joint movement or areas of frequent water immersion.
    • Do not apply or store below 5°C.

    Handy Tips

    • Ensure you tape both sides of the gap before applying the product for a neat finish and easier cleanup.
    • When first applying, extrude a small amount onto scrap material to ensure smooth, continuous flow of gap filler.
    • If wiping off excess with a wet finger, wet it with water (not saliva) to avoid bacteria that can promote mould growth.
    • Allow surfaces to skin before painting, approximately 30 minutes. Protect from rain until the surface is firmly skinned.
    • Some water-based undercoats and flat paints may crack when drying. To reduce this, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting.
    • Keep a pack of Selleys Sugar Soap Wipes handy for easy cleanup.

    Clean Up

    • Water-based, so clean up with water.
    • Uncured product may be removed with water.
    • Cured product can be removed by sanding and scraping.

    Size

    450g Cartridge

    Colours

    • Black
    • Brilliant White
    • Brown
    • Cedar
    • Charcoal
    • Coffee
    • Cream
    • Ivory
    • Light Grey

    Technology

    Water-Based

    Use

    Interior & Exterior

    Recently viewed products

      © 2025 Glues Australia,

        • American Express
        • Apple Pay
        • Google Pay
        • Mastercard
        • PayPal
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account