Description
Selleys Polyglaze Wash & Wax is a concentrated car wash that lifts dirt and road film while leaving a wax-boosted gloss behind, so a single bucket does the job of washing and shining. It is aimed at anyone who wants their car to look freshly detailed without setting aside an afternoon for a separate polish, and the 2 litre bottle is sized for households that wash regularly rather than occasionally.
The formula is a mild pH, water-based concentrate with strong wetting and cleaning action. Because it wets out the surface evenly and rinses away cleanly, it lifts grime without stripping the finish and dries down without water spotting, speckling or detergent residue. At the recommended dilution of roughly 30mL per 10 litres of water, a 2 litre bottle stretches to somewhere around 65 washes, which is where most of its value sits compared with ready-to-use products.
Where to use it
Exterior vehicle surfaces: painted panels and clear coat, glass and windscreens, polycarbonate headlight and light covers, vinyl roofs, plastic and rubber trims, bumper bars, wheels and tyres.
Outdoors: this is an outdoor, hose-and-bucket product. Wash in a shaded spot rather than direct sun so the solution does not flash off on hot panels, and ideally park on grass so run-off does not head straight into a storm water drain.
How to use
- Hose the loose dirt and heavier road grime off the vehicle first.
- Add roughly 30mL of concentrate to a bucket and fill with about 10 litres of water.
- Wash one section at a time with a clean sponge or wash mitt.
- Rinse each section off with clean water before the solution has a chance to dry on the paint.
- Dry the vehicle down with a chamois for the best finish.
Important notes
- This is a concentrate. Do not apply it undiluted.
- Do not let the detergent solution dry on the surface. Work in shade and rinse section by section.
- Protect the bottle from freezing during storage.
- Keep the container closed when not in use, and do not reuse the empty bottle for anything else unless it has been thoroughly decontaminated.
Specifications
| Brand |
Selleys Polyglaze |
| Product |
Wash & Wax |
| Pack size |
2L bottle |
| Form |
Concentrate, dilute before use |
| Appearance |
Clear blue liquid |
| pH |
7.0 to 8.5 |
| Viscosity at 25°C |
1200 to 2500 cps |
| Dilution rate |
Approx. 30mL per 10L of water |
| Approx. washes per bottle |
Around 65 at the recommended dilution |
| Application |
Sponge or wash mitt, rinse with clean water |
| Clean up |
Water |
| Country of origin |
Made in Australia |
Safety
Avoid contact with skin and eyes, and avoid breathing any mist, vapour or spray. Wear impervious gloves and eye protection when handling the concentrate, and use the product in a well ventilated area. Wash your hands after use.
If it gets in the eyes, hold the eyelids open and flood with water for at least 15 minutes, then see a doctor. For skin contact, remove any contaminated clothing and wash the skin thoroughly, seeking medical advice if irritation develops. If swallowed, do not induce vomiting, give a glass of water and seek medical advice. In Australia, the Poisons Information Centre can be reached on 13 11 26.
Spills are slippery underfoot. Clear the area, absorb the liquid with sand or soil, and collect it into a properly labelled container. Refer to your local council or state waste management authority for disposal. Consult the current Safety Data Sheet from Selleys for the full details before handling in quantity.
