Description
Selleys SolarFlex
Selleys SolarFlex provides protection from ultraviolet (UV) radiation and other harsh weather elements. Harsh Australian and New Zealand conditions make the choice of an effective solar/weather protection solution critical.
Features
- Superior weather protection
- Long-lasting flexibility
- No primer required before painting
- Watertight seal with a 10-year guarantee*
- Adhesion to wet or damp surfaces
- Non-bubbling
- Better curing and extrudability (>5°C) with no slump
- Paintable with water-based paints after product skins in 60 to 90 minutes
- Low VOC**
Where can this product be used?
- Skylights
- Walls
- Patios
- Floors
- Fencing
- Windows
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fibreglass
- Most plastics*
*Not suitable on polyethylene, polypropylene, or Teflon.
Application Instructions
Ensure substrates are clean and free of oil, grease, or loose particles.
Cut the seal and nozzle, then fit it to the cartridge and place it in the caulking gun.
Hold the caulking gun at a 45° angle and gun the sealant ahead of the nozzle, ensuring the product is pushed into the joint.
For neat joints, use masking tape on both sides of the joint and remove it before skinning.
Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g., polyethylene backer rod) and appropriate joint width/depth. See the technical datasheet for more information.
Limitations
- Not suitable on polyethylene, polypropylene, or Teflon.
- Cure excess product before disposal.
- Not for permanent water immersion or below water-line use. For water immersion, please use Selleys Marine Flex.