Description
SikaBond® -TechGrip is a high strength multipurpose, polyurethane glue that provides a super strong bond to almost any substrate and is ideal for woodworking and project work.
Uses
SikaBond® -TechGrip can be used on most substrates due to its excellent adhesion. These include:
- Wood
- Stone
- Metals
- Glass
- Ceramics
- Concrete
- Brick
- Masonry
Advantages
- Waterproof
- Resistant to solvents and chemicals
- Paintable with water based and solvent based paints
- High adhesion strength
Storage and Shelf Life
Store in a cool, dry place with 25C maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Ensure all surfaces are clean, dry, oil and dust free and that one surface is porous. (SikaBond® -TechGrip works best when both surfaces are porous).
Application
Apply sparingly to one surface and bring surfaces together within 15 minutes. Secure/clamp for 3-4 hours. Wipe excess away with a cloth to limit sanding after cure. Allow 24 hours for full cure. As glue will foam a little while curing, wipe off excess with a cloth to limit sanding and painting. Slightly dampen dry timber surfaces to improve bond and accelerate cure. Cleaning Wipe nozzle and cap of bottle after use and dispose of any unused material in accordance with local authority regulations.
Colour: Brown
Density 1.11 kg/litre approx.
Bond Strength Tensile Strength - 3030kpa
Test Substrate - Timber: End grain to end grain
Viscosity 6,000cps
Handling Precautions
Avoid contact with skin and eyes.
Wear protective gloves and eye protection during work.
If skin contact occurs, wash skin thoroughly.
If in eyes, hold eyes open, flood with warm water, seek medical attention without delay.
A full Material Safety Data sheet is available from Sika on request.
