Get a clean, hardware free look with T-Rex Clear Double Sided Tape. This high performance clear mounting tape creates a strong, permanent bond for photos, hooks, cable clips, house numbers, trims, and light decor. It is ideal when you want the hold without the hardware and a finish that stays virtually invisible on glass, tiles, metal, and painted walls.
Why you will love it
-
Crystal clear finish that helps hide the fix for a neat result
-
Strong permanent bond for everyday mounting and craft projects
-
Moisture and UV resistant construction for long lasting performance
-
Instant stick with pressure activation, no curing time required
-
No tools needed, peel and stick application
Great for
- Mounting signage, house numbers, and name plates
- Securing cable clips and small hooks
- Fixing splashback trim and edging
- Crafts, scrapbooking, and photo boards
- Temporary holding during light assembly
Works on
- Glass and mirrors
- Glazed tiles and ceramics
- Metal, aluminium, and stainless steel
- Finished timber and laminate
- Painted walls that are sound, clean, and fully cured
- Most rigid plastics except low surface energy plastics
Note: Not recommended for wallpaper, delicate or dusty surfaces, or low surface energy plastics such as PE, PP, and PTFE. Always test on a small area first.
How to use
-
Prepare the surface. Clean with isopropyl alcohol and let dry. Remove dust, grease, and loose paint.
-
Apply tape. Cut to length. Apply tape to the lightest item first. Press firmly along the whole strip.
-
Peel liner. Remove the protective liner without touching the adhesive.
-
Mount. Position carefully. Press firmly for 30 to 60 seconds to activate the bond. Maximum strength develops with time under steady pressure.
Removal tips
- Warm gently and peel back slowly at a low angle
- Use adhesive remover to clean any residue on robust surfaces
- Avoid pulling straight out from the wall to reduce risk of paint lift
Specifications
| Brand |
T-Rex |
| Product type |
Clear double sided mounting tape |
| Width |
19 mm |
| Length |
4.5 m |
| Colour |
Clear |
| Adhesive |
Acrylic based |
| Indoor or outdoor |
Indoor and protected outdoor applications |
| Liner |
Peel off release film |
Good to know
- For best results on painted walls, ensure paint is fully cured
- Heavier items may need additional strips to spread the load
- Use continuous strips near the edges of flat panels to reduce shear
What is in the pack
- 1 x roll T-Rex Clear Double Sided Tape 19 mm x 4.5 m
FAQs
Can I use it in wet areas
Yes for sealed, smooth surfaces such as glazed tiles and glass. Avoid constant immersion.
Will it damage paint
It can if paint is weak or not fully cured. Test first and remove slowly with heat to soften the adhesive.
Can it hold shelves
This tape is ideal for light mounting and trim. Use mechanical fixings for shelves and heavy items.