Description
The ToughBuilt Contractor Pouch is a hard-working 23-pocket tool pouch for tradies and serious DIYers, built around the ClipTech Hub so it can be swapped on and off a belt in seconds. A built-in kickstand lets it stand upright on the floor, a bench or a table, which keeps your most-used tools within easy reach when you are not wearing it.
About the product
The pouch is made from polyester and put together with ToughBuilt's 6-Layer Construction and heavy-duty rivet reinforcement at the stress points, so it is designed to cope with daily site use. The ClipTech Hub is included in the box and is the attachment point that lets the pouch clip onto a belt, so you can set up your rig to suit the job. The pouch is listed as weather resistant.
Where to use it
Indoors: fit-outs, renovations, electrical and carpentry work, or any job where you want hand tools and fixings close by.
Outdoors: framing, decking, fencing and general site work, where the pouch can hang from your belt or stand on the ground beside you.
How to use it
Fit the ClipTech Hub to your belt, then clip the pouch on or off as the job changes. When you need both hands free, take the pouch off and stand it on its kickstand on a flat surface. Features at a glance:
- 23 pockets and loops in total, made up of 18 inside and 5 outside pockets
- Extreme-duty hammer loop
- 2 large No-Snag Hidden Seam pockets for bigger tools and fixings
- Square pocket for a speed or rafter square
- Notebook pocket
- Integrated kickstand with feet for stable upright standing
- ClipTech Hub included
- Rugged 6-Layer Construction with rivet reinforcement
Important notes
This is an open-top pouch with no zip, no shoulder strap and no tape holder, so it suits tools you want to grab quickly rather than items that need to be secured. The ClipTech system is designed for the ToughBuilt ClipTech range, so check compatibility if you plan to mix it with other brands of belt or bag. Colour is shown as black on the manufacturer's listings, so check the product photo before ordering.
Specifications
| Brand |
ToughBuilt |
| Product |
Contractor Pouch |
| Model |
TB-CT-01 |
| Pockets and loops |
23 (18 inside, 5 outside) |
| Material |
Polyester |
| Colour |
Black |
| Size (W x D x H) |
Approx. 328 x 191 x 337 mm (12.9 x 7.5 x 13.25 in) |
| Included |
ClipTech Hub |
| Kickstand / feet |
Yes |
| Weather resistant |
Yes |
| Shoulder strap |
No |
| Zippered top |
No |
| Tape holder |
No |
Care and storage
Empty the pouch and brush out dust, offcuts and debris regularly. If it gets wet, let it dry out in the open air before storing it, and keep it away from direct heat. Avoid overloading the pockets with very heavy tools, and check the rivets and ClipTech Hub from time to time for wear.
