Get crisp, professional paint lines with Wagner Mask-It. This painter’s masking tape is designed to seal neatly along the edge, reduce paint bleed, and remove cleanly when the job is done. Ideal for walls, trim, skirting boards, window frames, and any detail work where a sharp finish matters.
Key Benefits
-
Clean paint edges that help minimise bleed on most interior surfaces.
-
Easy application with a smooth unwind and hand tearable backing.
-
Clean removal when used as directed on properly prepared surfaces.
-
Works with brushes, rollers, and spray for DIY and trade jobs.
Perfect For
- Cutting in around ceilings, cornices, and trims
- Protecting hardware, switches, and fittings
- Two tone feature walls and accent colours
- Masking glass, tiles, and metal fixtures during repainting
Surface Compatibility
Use on properly prepared, fully cured interior paint, primed timber, metal, glass, and most smooth surfaces. Always test in an inconspicuous area first.
How To Use
-
Prep the surface: Ensure it is dry, dust free, and fully cured.
-
Apply the tape: Press down firmly along the edge with a putty knife or fingernail to seal.
-
Paint: Roll or brush away from the tape edge for best results.
-
Remove: Peel back slowly at a 45 degree angle while paint is still slightly tacky, unless your coating specifies otherwise.
Pro Tips
- Burnish the tape edge lightly to improve the seal on textured areas.
- Apply light coats near the edge. Heavy wet coats can overwhelm any mask.
- For long runs, overlap tape pieces by a few millimetres and press the overlap firmly.
Good To Know
- Suitable for indoor projects and general decorating.
- Store in a cool, dry place away from direct sunlight to maintain performance.
- Available in popular widths to suit trim work and broad masking.
Frequently Asked Questions
Will it pull off fresh paint?
Only apply to fully cured paint. Cure times vary by product and conditions. When in doubt, allow extra time and test first.
Does it work on lightly textured walls?
Yes, on many light textures, but press down firmly along the edge and use lighter coats near the tape line.
Can I use it with spray equipment?
Yes. Apply, seal the edge, and use controlled passes. Avoid flooding the tape line.
