Loxeal Cleaner 10 Degreaser 1L Tin
Loxeal Cleaner 10 is a non-CFC, solvent-based cleaner and degreaser formulated for preparing surfaces before bonding or sealing with adhesives and sealants. Great adhesion starts with a clean joint: Cleaner 10 lifts oil, grease and contamination, evaporates completely in around 60 seconds and is non-corrosive, leaving surfaces perfectly ready for adhesive. Importantly, it has no effect on the cure speed or final strength of Loxeal adhesives and sealants. This 1 litre tin is the economical choice for busy workshops and production benches.
Why choose Loxeal Cleaner 10?
-
Purpose-made for surface prep before threadlockers, retainers, epoxies, acrylics and instant adhesives
-
Fast flash-off – dries in about 60 seconds at room temperature
-
Non-corrosive and residue-free on metals
-
Does not interfere with adhesive cure speed or bond strength
- Economical 1 litre tin for decanting or wipe application
- Non-CFC solvent formulation
Typical applications
- Degreasing machined, treated or coated surfaces before bonding or sealing
- Cleaning oil- and grease-contaminated parts in maintenance and assembly work
- Preparing plastic substrates prior to adhesive application (check compatibility first)
How to use
- Apply Cleaner 10 generously to the surfaces to be bonded.
- While the surface is still wet, wipe with a clean cloth to lift heavy contamination.
- Allow the solvent to evaporate until the surface is completely dry (about 60 seconds).
- Apply the adhesive or sealant immediately after drying and assemble the joint.
Specifications
| Formulation |
Non-CFC solvent blend |
| Appearance |
Colourless liquid |
| Boiling range |
+92°C to +102°C |
| Flash point (COC/DIN/ISO 2592) |
-1°C (highly flammable) |
| Density (+25°C, DIN 51757) |
0.70 g/ml |
| Drying time (+25°C) |
Approx. 60 seconds |
| Water solubility |
Not soluble |
| Corrosivity |
None |
| Pack size |
1 litre tin |
| Shelf life |
12 months at +5°C to +25°C |
Important notes
- The solvent can affect certain plastics and coatings – check compatibility on a hidden area first
- Unclean or partially cleaned surfaces can significantly reduce adhesive performance
- Do not return used product to the original container
- Store between +5°C and +25°C in a cool, dry place
Safety
Consult the Safety Data Sheet (SDS) before use. Highly flammable: keep away from naked flames and non-flameproof electrical equipment, use only in well-ventilated areas, avoid prolonged or repeated skin contact and do not smoke near the product.
Product information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.
