Loxeal Cleaner 10 Degreaser Spray 400ml
Loxeal Cleaner 10 is a non-CFC, solvent-based cleaner and degreaser for preparing surfaces before bonding or sealing with adhesives and sealants. This 400ml aerosol puts fast, controlled surface prep straight in your hand: spray, wipe, and the solvent flashes off in around 60 seconds leaving a clean, dry, non-corroded surface ready for adhesive. Cleaner 10 has no effect on the cure speed or final strength of Loxeal adhesives and sealants – but a dirty joint certainly will.
Why choose Loxeal Cleaner 10 spray?
-
Convenient aerosol application – even coverage on parts, threads and hard-to-reach areas
-
Fast flash-off – dries in about 60 seconds at room temperature
-
Non-corrosive and residue-free on metals
-
Does not interfere with adhesive cure speed or bond strength
- Ideal partner for threadlockers, retainers, epoxies, structural acrylics and instant adhesives
- Non-CFC solvent formulation
Typical applications
- Spray-degreasing fasteners, threads and machined parts before threadlocking or retaining
- Cleaning oil- and grease-contaminated surfaces in maintenance and assembly work
- Preparing treated, coated or plastic substrates prior to bonding (check compatibility first)
How to use
- Spray Cleaner 10 directly onto the surfaces to be bonded.
- While still wet, wipe with a clean cloth to remove heavy contamination.
- Allow the solvent to evaporate until the surface is completely dry (about 60 seconds).
- Apply the adhesive or sealant immediately after drying and assemble the joint.
Specifications
| Formulation |
Non-CFC solvent blend |
| Appearance |
Colourless liquid |
| Boiling range |
+92°C to +102°C |
| Flash point (COC/DIN/ISO 2592) |
-1°C (highly flammable) |
| Density (+25°C, DIN 51757) |
0.70 g/ml |
| Drying time (+25°C) |
Approx. 60 seconds |
| Water solubility |
Not soluble |
| Corrosivity |
None |
| Pack size |
400ml aerosol spray |
| Shelf life |
12 months at +5°C to +25°C |
Important notes
- The solvent can affect certain plastics and coatings – check compatibility on a hidden area first
- Unclean or partially cleaned surfaces can significantly reduce adhesive performance
- Pressurised container – protect from sunlight and do not expose to temperatures above +50°C
- Store between +5°C and +25°C in a cool, dry place
Safety
Consult the Safety Data Sheet (SDS) before use. Highly flammable aerosol: keep away from naked flames, sparks and non-flameproof electrical equipment, use only in well-ventilated areas, avoid prolonged skin contact and do not smoke near the product.
Product information is provided as a general guide only. Always refer to the manufacturer's Technical Data Sheet and Safety Data Sheet, and test the product for suitability in your specific application before use.
