Loctite Super Glue Longneck Bottle features a precision tip which allows controlled application without dripping, thus less mess. It has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. The long nozzle is ideal for gluing hard to reach surfaces. The ''finger friendly'' bottle keeps fingers glue free, as well as allows for a continuous flow or a precise drop of glue. It bonds a variety of materials including leather, ceramic, rubber, paper, metal, china, wood and most plastics. Loctite Super Glue Longneck Bottle dries clear and sets without clamping. Loctite Super Glue Longneck Bottle is resistant to moisture, most chemicals and freezing temperatures. Recommended For Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass™, polycarbonate, polystyrene and PVC Repairing figurines, costume jewellery, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings Not Recommended For Use in dishwasher, oven or microwave Use on repairs needing high flexibility Glazed surfaces Exterior Applications Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene Safety Precautions Apply in a well-ventilated area. Wear gloves and wash hands after use. Preparation Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined. Application Twist off the cap by turning counter-clockwise. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace the cap. Cleanup Cured adhesive may be cut away with caution using a sharp blade, acetone or with boiling water.
$8.44
Loctite's versatile and reliable Super Glue Liquid is fast and strong and has a range of applicators that will get the job done quickly in every situation. It dries transparent to form a long-lasting invisible bond in seconds. Now with a NEW formula, resisting to all conditions: *Water and dishwashing *Shock *Temperatures from -50°C up to 120°C Recommended on: China, Porcelain, Metal, Rubber, Leather, Wood, Plastic (except PE/PP), Paper. Properties: Multi-use liquid superglue, ideal on non-porous surfaces Water and dishwasher resistant Shock resistant Temperature resistant (from -50°C up to 120°C) Bonds in seconds Withstands heavy loads Dries transparent Easy to open, self-piercing and anti-clog cap Choice of applicators - anti-spill / easy grip / long nozzle / brush-on Suitable for use on most surfaces* Solvent-free *Except polyethylene (PE), polypropylene (PP), car glass, Styropor® and synthetic fibres. Ensure surfaces to be joined are clean, completely dry and close fitting. Twist cap clockwise until it locks, then unscrew in an anti-clockwise direction to open. Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set. Replace the cap immediately and store upright in a cool dry place.
$16.00
Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to-use, water-based adhesive, with the holding power Gorilla is known for. The glue is incredibly water-resistant and dries a natural colour that offers an invisible bond line for your projects. Clamp Time: 20-30 Minutes // Open Time: 5-10 Minutes Dry Time: 80% in 1-2 Hours // Dry Color: Natural Wood Color Full Cure: 24 Hours Application For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. Just how much Gorilla Wood Glue to apply depends on many factors. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: 1 gallon of Gorilla Wood Glue will cover about 200 square feet. 1 fluid ounce will cover approximately 1.6 square feet. Clamping The technique and type of clamp to be used are determined by many factors: the specific type of joint, type of stock or lumber, the moisture content of stock, room temperature, assembly time and surface quality. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time (amount of time for glue to reach total bonding strength): 24 hours Clean Up Clean up while the glue is wet: Use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, and as needed. Wash hands, skin and damp cloths with soap and warm water, then rinse. Clean up when the glue has dried: Use a sharp putty knife, razor, or sharp scraper to shave hardened glue from the surface, then sand as needed. Soak hands and skin in soap and warm water, wash, then rinse. Cleaning the bottle tip: Use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap and push the clog backwards with a toothpick, then rinse cap with warm water. To remove Gorilla Wood Glue from hands, wash with warm soap and water.
$18.73
Gorilla Spray Adhesive is heavy duty, multi-purpose and easy to use. Gorilla Spray Adhesive forms a clear, permanent bond that is moisture resistant and can be used on projects both indoors and out. This spray adhesive is also photo safe. Its wide pad nozzle and controlled, fine mist spray provide an even application on the project you are working on. PRODUCT FEATURES HEAVY DUTY: Dries Permanent EASY TO USE: Repositionable CLEAR COLOR: Non-Yellowing* INDOOR & OUTDOOR: Moisture Resistant CONTROLLED SPRAY: Even Application WIDE PAD NOZZLE PHOTO SAFE All surfaces should be clean and free of dirt, grease and oil. Protect surrounding areas from overspray to avoid residual adhesive. Shake can well before using. Hold the can 15 to 20cm from surfaces to be bonded and spray an even coat of adhesive. For Maximum Bond Strength: Spray both surface to be joined. Allow to dry to tack (approximately 1 minute) and press surfaces firmly together. For Repositionable Bonds: Spray a light even coat on one surface. Allow to dry 1-3 minutes before joining. Repositionable up to 10 minutes depending on surface type, then bond becomes permanent. To remove, gently peel from corner. Tip: To avoid possible clogging, turn can away from body, turn upside down and spray a short jet of clear gas after completing the job. *Not recommended for use on vinyl materials, automotive headliners, polypropylene, polyethylene or similar materials. Do not use for bonding weighted materials. APPLICATION TEMPERATURE – 10°C to 32.2°C OUTDOOR – Yes MOISTURE RESISTANT – Yes PAINTABLE –Yes SANDABLE – Yes STAINABLE – No CURED COLOR – Clear PHOTO SAFE – Yes How do I remove Gorilla Spray Adhesive from my surface? To clean surface while adhesive is still wet/uncured, wipe adhesive off the project with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. Once cured, Gorilla Spray Adhesive may be removed using mechanical means by gently scraping surface, being careful not to damage the surface underneath. How do I remove Gorilla Spray Adhesive from body/skin? While still wet, Gorilla Spray Adhesive can be removed by wiping adhesive with a dry cloth, and then washing the area with soap and water. Once cured, rinse well with water. Is Gorilla Spray Adhesive food safe? Gorilla Spray Adhesive is not recommended for direct or indirect food contact and should not be considered food safe. What surfaces will Gorilla Spray Adhesive bond to? Gorilla Spray Adhesive is a multi-purpose product that will bond a wide variety of surfaces including fabric, paper, wood, plastic*, cardboard, foam, metal and more! NOTE: Not recommended for use on polypropylene (PP) or polyethylene (PE) plastics, vinyl, or any type of rubber with high oil or plasticizer content. Not for use on food contact surfaces. Will Gorilla Spray Adhesive bond vinyl/acrylic/rubber? Gorilla Spray Adhesive will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP) or polyethylene (PE) plastics, vinyl, or any type of rubber with high oil or plasticizer content.
$29.95
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](http://gluesaustralia.com.au/cdn/shop/files/9314235_0fda3f36-74b9-4f76-87c5-eecf1c56afcc.jpg?v=1754715680&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Pink]](http://gluesaustralia.com.au/cdn/shop/files/9314235_3922d4f4-2f1d-4263-a2de-14b767df10ba.jpg?v=1754715681&width=645)
$9.49
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](http://gluesaustralia.com.au/cdn/shop/files/9314235_e4f50d8f-e0a6-4255-a242-9c3e7590f0f3.jpg?v=1754715675&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Green]](http://gluesaustralia.com.au/cdn/shop/files/9314235_e401b93c-d8cb-46ff-be50-3f30c2495024.jpg?v=1754715675&width=645)
$9.49
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Blue]](http://gluesaustralia.com.au/cdn/shop/files/9314235_84aa9bc6-f55e-40c0-afbe-820db6fddb04.jpg?v=1754715673&width=645)
![Boyle Glow In The Dark Sparkling Craft Glue Kids Safe 147ml [Colour: Blue]](http://gluesaustralia.com.au/cdn/shop/files/9314235_0c7f6c0e-695e-4545-a57c-1e5bf7ca1f0c.jpg?v=1754715673&width=645)
$9.49
Quick Drying Ideal for most handicrafts Airtight Cap Boyle craft glue is ideal to use on paper, cardboard, wood, plastic, glass, ceramics, metal, fabrics, felt, yarns, beads, sequins, leather and much more.
$10.82
Quick Drying Ideal for most handicrafts Airtight Cap Boyle craft glue is ideal to use on paper, cardboard, wood, plastic, glass, ceramics, metal, fabrics, felt, yarns, beads, sequins, leather and much more.
$3.08
Bostik Hot Melt Sticks are made of a general purpose translucent flexible hot melt in a stick form for use with the Bostik Hot Melt Glue Gun. It provides an instant, fast, clean and versatile bond between a myriad of household and craft materials and suitable for many porous materials. Recommended Uses Ideal for: Craft projects Home décor projects Minor household repairs DIY projects Materials Designed to stick to: Most craft and household materials Fabric Wood Leather Most plastics Polystyrene Ceramics Features Once heated and gunned out, it provides instant adhesion Adhesive is clear and flexible when dry Fast, clean and versatile
$5.60
Industrial grade PVA, especially developed for use by professional woodworkers and craftsmen, for large projects. Off-white in colour, drying to a light coloured clear film. Features Excellent performance properties for repairs or building projects No mixing required Suitable for exterior use in non-structural applications Heat resistant to 110°C (bonds will not weaken in exposure to direct summer sun) Can be chiselled, routed or turned Suitable for end grain gluing – won’t stain timber, cream in colour, but dries clear with a slight yellow tint Non-toxic Sandable – will not clog sandpaper like other PVA emulsion glues More water resistant than Aquadhere interior Has a higher heat resistance than Aquadhere interior Paintable Provides a stronger bond than Aquadhere interior for larger jobs Bonds MDF Weather resistant Cleans up with water Where can this product be used? Cabinet and furniture making Timber letterbox Making a bookshelf Restoring furniture Gluing cupboard shelves for additional support Repairing a door frame or window Repairing or building wooden outdoor furniture Indoor furniture Storage chest for tools Pot plant stand Dog kennel Bed heads Timber joinery Wooden toys Unsuitable for use on coated wallpaper overlaps eg vinyl Will not take common timber stains Not recommended for joints that are subjected to constant high stress. Instead, use Selleys 308 High Stress wood glue Not suitable for below waterline applications or continuous submersion. We recommend Selleys Knead It Aqua for these situations. What materials is this product suitable for? Softwoods Plywood Joinery Hardwoods MDF Laminating Particleboard Dowelling Veneering Chipboard How to use this product Surfaces to be bonded must be close fitting, free from dust, dry and clean from grease. Shake bottle before use Apply adhesive liberally to one surface only, position surfaces and press together while still wet. Immediately clamp for 30 minutes for softwoods and 1 hour for hardwoods. Alternatively, low clamping pressures (50lbs/in2) can be used with softwoods; higher pressures are recommended for hardwoods (100 – 150lbs/in2). Do not stress joint for 12 hours. Wipe off excess adhesive while still wet with a damp cloth. If the wood is to be stained, any residual Aquadhere left on the timber surface may prevent the stain from taking to the wood. Maximum strength is achieved after 12 hours, but longer in cold, damp conditions, or when used on dense timbers. Clean all tools with water before adhesive is allowed to dry. If dry, soak in water until adhesive is soft. Cure slows significantly in humid, cold conditions. Handy tips 1L covers approx. 5m2 To fill small gaps, Aquadhere can be mixed with sawdust. Longer clamping times may be required for joints under high stress, or alternatively use 308 High Stress Wood Glue. Avoid contaminating Aquadhere Exterior with iron and steel, eg nails, etc. Aquadhere contaminated with rust (iron oxide) will stain brown/black in the presence of tannins in many woods. Painting or varnishing constructions made of porous softwoods will improve the resistance of bonds to water exposure. On very porous surfaces applying a thin layer to each side and allowing to soaking in before applying a second layer to one side only may result in a stronger bond. If you are gluing over a larger surface, try using a small roller to aid in application. For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using Selleys Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as Selleys Kwik Strip Smart. Ensure the surface is dry before applying the product. Keep a canister of Selleys Hand Kleen Wipes nearby for a quick and effective cleanup.
$18.30
Scotch Heavy Duty Shipping Packaging Tape is a clear, strong box sealing tape for packing parcels, moving boxes and storage cartons, supplied here as a single 48mm x 50m roll. It is built to grip firmly on most cardboard box types, so one clean strip across the seam is usually all you need rather than several layers.About the formulaThe tape uses a rubber hot melt adhesive that is solvent-free and designed to hold firmly once pressed down. It is 75 microns thick and fully clear, so addresses, labels and handwriting on the carton remain easy to read through the tape.Where to use itIndoors: sealing moving boxes, storage cartons, online order parcels and general packing jobs around the home, office or workshop.Outdoors: short-term sealing of boxes where they are kept dry and out of prolonged weather.Suitable materials include standard corrugated cardboard cartons and boxes made from recycled board.How to use itMake sure the box flaps are dry, clean and free of dust or loose fibres. Close the flaps, then run the tape along the centre seam and press it down firmly so the adhesive makes full contact. For a more secure result, use a tape dispenser and finish by pressing the tape ends down on both sides of the box.Important notesThis tape is made for sealing cartons and is not intended for long exposure to rain, damp or harsh weather. Very dusty, wet or oily surfaces can reduce grip, so wipe them first. Test on a small area if you plan to use it on anything other than cardboard.Specifications Brand Scotch (3M) Pack 1 roll Width 48 mm Length 50 m Thickness 75 microns Colour Clear Adhesive Rubber hot melt, solvent-free Application By hand or with a tape dispenser Use Box and carton sealing SafetyUse with normal care. Cut the tape with a dispenser or scissors and keep fingers clear of the cutting edge. Keep out of reach of children and store the roll in a cool, dry place away from direct sunlight. Refer to the Safety Data Sheet (SDS) for full details.
$10.38
Velcro Brand Stick On Dots are a tidy, tool-free way to hang and hold lightweight items indoors, supplied here as a 40 pack of black 22mm adhesive-backed hook and loop dots. They give you a simple alternative to nails, screws, glue and tape for small jobs around the home, office, classroom or craft table.About the productEach dot is a preformed, round piece of nylon hook or loop with a peel-and-stick adhesive backing, so there is nothing to measure, cut or mix. The hook and loop halves grip together firmly and can be pulled apart again when you need to take the item down. The nylon construction is durable and made for everyday indoor use.Where to use itIndoors: hanging notices, message boards, signs, posters and lightweight artwork, parking remote controls and small tools, labelling and organising storage containers, and attaching items in craft, scrapbooking and school projects.Outdoors: not recommended, as prolonged exposure to direct sunlight and the elements can damage the fastener.Best on smooth, clean, dry indoor surfaces such as timber, metal, glass, tiles, cardboard, painted walls and many plastics (test plastics first, as the dots may not grip every plastic).How to use itMake sure the surface is smooth, clean and dry. Peel the backing from a loop dot, position it and press down firmly to activate the adhesive. Repeat with a hook dot on the item you are mounting, then press the two together. Leave about 15 minutes before putting the dots to work.Important notesThe adhesive reaches its maximum strength after about 24 hours. Application works best at room temperature, roughly 18 to 24°C. Test a small area first if you are unsure about the surface. Moving a dot after it has been stuck down weakens the adhesive and may mark the surface, so position carefully. Not recommended for fabrics, flexible vinyl, PVC, wallpaper, loose or flaking paint, porous surfaces, wet areas or underwater use. Intended for lightweight items only.Specifications Brand Velcro Brand Product Stick On Hook and Loop Dots (Sticky Back) Pack 40 dots Dot size 22mm Colour Black Material Nylon hook and loop Backing Self-adhesive, peel and stick Application By hand, no tools required Full adhesive strength About 24 hours Use Indoor only SafetyUse as directed on clean, dry surfaces and keep the dots away from small children, as they are small parts. Store in a cool, dry place in the original pack. Refer to the Safety Data Sheet (SDS) for full details.
$20.87
Velcro Brand Stick On Hook and Loop Tape in black is a cut-to-length, peel-and-stick fastener that lets you hang, attach and organise lightweight items indoors without nails, screws or glue. It suits home, office and classroom jobs where you want a neat, tool-free fixing on a smooth surface.About the formulaA nylon hook and loop set with an adhesive backing on each side. You cut a length off the 25mm wide, 1m roll to match the job, peel away the backing and press it into place. The hook and loop faces press together to form a fastener you can open and close repeatedly. The black finish blends in on most surfaces.Where to use itIndoors: displaying posters, signs, prints and artwork, labelling storage containers, keeping frequently used items within reach, and light craft or display projects.Outdoors: not recommended. Prolonged exposure to direct sunlight and the elements will damage the fastener.Suited to smooth, clean, dry indoor surfaces such as wood, metal, glass, cardboard and plastic (test plastics first, as the adhesive may not grip every type).How to use itClean and dry the surface first so it is free of dust, grease and moisture. Cut the tape to the length you need, remove the backing from the hook and loop pieces, and press them firmly onto both surfaces. For best adhesion, apply at room temperature, ideally between 18 and 24°C. Test a small area first if you are unsure about the surface.Important notesThe adhesive reaches its maximum strength after about 24 hours, so allow time to set before putting weight on it. This general-purpose tape is intended for lightweight items. Not recommended for laundered fabrics, PVC, wallpaper, loose paint, or porous or flaking surfaces, and not suitable for wet areas. Moving the fastener after it has been stuck down will weaken the adhesive and may mark the surface. For heavier loads, rough surfaces or outdoor jobs, choose a heavy duty tape instead.Specifications Brand VELCRO® Brand Product Stick On Hook and Loop Tape Size 25mm wide x 1m long Colour Black Material Nylon hook and loop Backing Self-adhesive (peel and stick) Application Cut to length, applied by hand Full adhesive strength After about 24 hours Use Indoor only SafetyUse with normal care. Cut the tape with sharp scissors, keep small offcuts away from young children and pets, and store the roll in a cool, dry place away from direct sunlight. Refer to the Safety Data Sheet (SDS) for full details.
$13.39
Boyle Hot Melt Glue Sticks are a pack of eight clear 7mm sticks made for use in a high temperature glue gun, handy for home, office and school craft projects. They give a quick, strong hot glue bond on lots of everyday craft and household materials, and they suit most handicraft jobs.About the formulaThese are clear hot melt glue sticks. According to Boyle, they are non-toxic, odourless and acid free, and they dry clear so the glue line stays discreet on finished projects. Each stick is 200mm long and 7mm in diameter, so check that your glue gun takes 7mm sticks before you buy.Where to use itIndoors: craft and handicraft projects, school and homework projects, office jobs, jewellery making and quick household fixes.Outdoors: not recommended. The supplier lists this product for indoor use only.Suitable materials include cardboard, ceramics, fabric, glass, jewellery, paper, plastic, leather, metal and wood. It is a good idea to test on a small hidden spot first, especially on plastics and delicate or heat-sensitive items.How to use it Load a stick into a high temperature glue gun with a 7mm barrel and let the gun heat up fully. Make sure the surfaces are clean, dry and free of dust and grease. Squeeze the trigger to lay glue on one surface, then press the parts together straight away and hold them until the glue cools and sets. Work quickly, as hot melt glue cools fast and loses its tack. Important notesThe supplier does not list this product as child friendly, so children should only use it with close adult supervision. Molten glue and the gun nozzle get very hot and can cause burns. Do not touch hot glue with bare skin. Not recommended for outdoor use. Set and cure times and temperature resistance of the bond have not been published by the manufacturer, so test before relying on it for anything that will be heated or put under load. The sticks are sold on their own and do not include a glue gun.Specifications Brand Boyle Product Hot Melt Glue Sticks Pack 8 sticks Stick size 200mm long x 7mm diameter Colour Clear Application High temperature glue gun Use Indoor use only Features Non-toxic, odourless, acid free, dries clear SafetyMolten hot melt glue can cause serious burns, so avoid skin contact, use the glue gun on a stable heat-safe surface and unplug it when you have finished. Use in a well-ventilated area and keep out of reach of children. Store the sticks in a cool, dry place away from heat. If you get hot glue on your skin, cool the area under cold running water straight away and do not peel off the glue. Refer to the Safety Data Sheet (SDS) for full details.
$2.90
Stanley Dual Temp Mini Glue Sticks are all-purpose hot melt glue sticks for 7mm mini glue guns, supplied here as a 24-pack of 100mm sticks for craft, hobby and household jobs. They are made for mini hot melt, low temperature and dual temperature guns, so you can bond delicate, heat-sensitive materials as well as everyday items.About the formulaA thermoplastic hot melt adhesive based on ethylene vinyl acetate (EVA) and petroleum resin, with no solvents to evaporate. Because it is a dual melt formula, it can be run on a low heat setting for materials that would be damaged by high heat, or on a high heat setting for harder, non-porous surfaces. The glue sets quickly as it cools, usually within about 15 to 30 seconds.Where to use itLow temperature setting: paper, ribbon, foam and other delicate or heat-sensitive materials in craft and hobby projects.High temperature setting: china and leather, and general household repairs and fastening jobs.Suitable materials include paper, cardboard, leather, china and other non-porous surfaces, and heat-sensitive craft materials such as polystyrene foam, ribbon and dried flowers. Test on a small, hidden area first if you are unsure how a material will react to heat.How to use it Check that your glue gun takes 7mm mini glue sticks. These sticks are not compatible with standard 11mm glue guns. Make sure surfaces are clean, dry and free of dust and grease. Load a stick into the gun and let it heat fully. Choose the low setting for delicate materials or the high setting for china, leather and other non-porous surfaces, if your gun has a temperature switch. Apply the glue to one surface, press the parts together straight away and hold them still until the glue sets. Unplug the gun and rest it safely when you finish. Important notesWork quickly, as hot melt glue starts to set within seconds of application. Molten glue and the gun nozzle can cause burns, so keep them away from skin and children. Hot melt adhesive is not designed for heavy structural loads or for surfaces that stay hot, because the bond can soften when reheated. Glue guns are sold separately.Specifications Brand Stanley Product Dual Temp Glue Sticks (Dual Melt Mini) Model number 1-GS10DT Pack 24 sticks Stick size 7mm diameter x 100mm length Colour White Base Thermoplastic hot melt (EVA and petroleum resin) Application Mini hot melt, low temperature and dual temperature glue guns Set time About 15 to 30 seconds Use Craft, hobby, household and general fastening SafetyThe main hazard is thermal burns from molten glue, which can cause intense pain and tissue damage. Avoid breathing fumes from heated glue and use the gun in a well-ventilated area. If it gets in the eyes, flush with water while holding the eyelids open and seek medical care straight away. Refer to the Safety Data Sheet (SDS) for full details.
$11.07
3M Heavy Duty Black Duct Tape is a dependable all-rounder for the toolbox, supplied here as a single 48mm x 41.1m roll for sealing, holding, bundling and quick repairs around the home, workshop or jobsite. It combines a grabby rubber adhesive with a tough, water-resistant cloth-reinforced backing, so it sticks quickly, tears cleanly by hand and leaves a neat black finish.About the formulaThis is a cloth-reinforced duct tape with a polyethylene backing over a woven scrim and a natural rubber adhesive system. 3M describes the adhesive as an improved, industrial strength formulation that bonds on contact, so you can seal, hold or reinforce straight away without waiting. The backing is flexible and conformable, applies smoothly and resists moisture for longer-lasting repairs. The tape is a medium-strength, temporary solution, not a structural bond.Where to use itIndoors: sealing and holding boxes and packages, bundling cables and hoses, re-gripping tool handles, patching and reinforcing items, labelling and colour-coding, and general fix-it jobs around the house, office or workshop.Outdoors: this tape is intended for indoor use only, so choose a purpose-made weatherproof or UV-stable tape for exposed outdoor repairs.Suitable surfaces include metal, glass, plastic, cardboard and corrugate, and laminate. Test on a small, hidden area first if you are unsure, particularly on painted, delicate or textured surfaces.How to use itClean the surface so it is dry and free of dust, oil, grease and loose material. Pull off the length you need and tear it by hand, either lengthwise or crosswise, with no scissors required. Press the tape down firmly along its whole length, smoothing out wrinkles and air bubbles so the adhesive makes full contact. Overlap adjacent strips slightly when you are sealing or reinforcing a larger area.Important notesThis is a temporary, medium-strength solution and is not designed for load-bearing or structural fixing. It is intended for indoor use only. Adhesion will be reduced on dusty, wet, oily or very rough surfaces. Rubber-based tapes can leave residue on some surfaces, so test before applying to finished or delicate materials, and remove the tape sooner rather than later where a clean removal matters.Specifications Brand 3M Product Heavy Duty Black Duct Tape Model 2145-BK Size 48mm x 41.1m Pack 1 roll Colour Black Adhesive Natural rubber Backing Polyethylene over cloth scrim Tear By hand, lengthwise or crosswise Use Indoor SafetyKeep away from heat and open flame, as the backing and adhesive are combustible. Handle with care when tearing and avoid contact with eyes. Store rolls in a cool, dry place out of direct sunlight and away from extreme heat to protect the adhesive. Always follow the manufacturer's instructions and refer to any manufacturer safety information supplied with the product. Refer to the Safety Data Sheet (SDS) for full details.
$24.89
Boyle Clear Spray Adhesive is a handy aerosol glue for bonding and mounting lightweight materials around the home, office and craft table, supplied here as a single 350g can. It goes on as an even spray and dries clear, so it suits neat jobs where you don't want visible glue lines.About the formulaA solvent-based spray adhesive. The supplied product data lists a light aliphatic petroleum solvent, dichloromethane and a hydrocarbon propellant. The nozzle spray gives broad, even coverage, and the adhesive is quick drying. Once cured it is clear, moisture resistant, UV/sunlight resistant and drillable. It is not solvent resistant and cannot be sanded.Where to use itIndoors: mounting prints, photos and artwork, laminating paper and card, and general craft, scrapbooking and office projects.Around the workshop: light bonding and mounting jobs on timber, metal, glass and fabric where a clear, even bond is wanted.Suitable materials include cardboard, cork, wood, paper, fabric, glass, prints and photographs, and metal. Plastics and foams are not listed by the manufacturer, so test a small hidden area first.How to use itShake the can well before use. Hold it roughly 20 to 25cm from the surface and spray an even coat. For a temporary bond, spray one surface only, let it dry, then press the surfaces together. For a permanent bond, spray both surfaces, wait until they turn tacky, then press them together firmly. Always test on an offcut or sample before coating the full surface. Work in a well-ventilated area and keep the nozzle clear of ignition sources.Important notesThis adhesive is designed for lightweight materials, not heavy or structural loads. It is not solvent resistant and not sandable. Solvent-based sprays can mark or soften some foams and plastics, so a test patch is a must. Full cure times are not published by the manufacturer, so allow plenty of time before putting the bond under stress.Specifications Brand Boyle Product Clear Spray Adhesive Size 350g aerosol can (single) Colour Clear Base Solvent-based (petroleum solvent, dichloromethane, hydrocarbon propellant) Application Aerosol nozzle spray Recommended use Bonding and mounting Dries clear Yes Moisture resistant Yes UV/sunlight resistant Yes Drillable Yes Solvent resistant No Sandable No SafetyUse only outdoors or in a well-ventilated area, and do not breathe the spray or mist. Wear protective gloves and eye protection, and wash hands and exposed skin after handling. Keep away from heat, sparks, open flames and hot surfaces, and don't spray near an ignition source. Do not pierce or burn the can, even when empty. Refer to the Safety Data Sheet (SDS) for full details.
$22.22
Elmer's Glue-All Multi-Purpose Extra Strong Liquid Glue is a general-purpose white PVA glue for craft tables, classrooms and light household repairs, supplied in a 473ml bottle. It joins porous and semi-porous materials such as paper, fabric, wood, leather and ceramics, and its easy, ready-to-use formula suits beginners and families.About the formulaA water-based, white PVA (polyvinyl acetate) liquid glue with a mild vinegar-like odour. The manufacturer describes it as non-toxic, with a strong bond and a quick-drying, clear-drying finish. It needs no mixing, and it can also be used to make homemade glue slime.Where to use itIndoors: school and craft projects, paper and cardboard work, fabric and leather crafts, small timber and ceramic repairs, and odd jobs around the kitchen, workshop, den or garage.Outdoors: not recommended. The product is intended for indoor use only.Suitable materials include paper, cardboard, fabric, wood, leather and ceramics.How to use itMake sure the surfaces are clean, dry and free of dust, oil and grease. Apply a thin, even layer of glue to one or both surfaces, press the parts together and hold or clamp them until the glue grips. Wipe away any excess straight away with a damp cloth, as wet glue washes up with soap and water. Leave the bond to fully dry before putting it under load. Close the cap firmly after use.Important notesDo not use on photos, bare metal, or surfaces that will be submerged or heated. Keep the product from freezing, because freezing can damage the glue. This is not a structural adhesive, so choose a purpose-made product for load-bearing or outdoor jobs. Always test a small hidden area first on delicate or finished surfaces.Specifications Brand Elmer's Product Glue-All Multi-Purpose Extra Strong Liquid Glue Size 473ml bottle Colour White liquid Base PVA (polyvinyl acetate), water-based Application Bottle, applied by hand Clean up Soap and water while wet Use Indoor use SafetyNormal use does not call for special protective equipment, but wash your hands after use and keep the bottle out of reach of young children. In case of eye contact, rinse well with water. Store in the original container with the cap closed, away from freezing conditions. Refer to the Safety Data Sheet (SDS) for full details.
$12.07
Bostik Glu Stik is the classic clear-drying glue stick that generations of Australian classrooms, craft rooms and home offices have run on. This listing is a bulk pack of ten 35g sticks, which is the economical way to buy for a school term, a busy studio, an office stationery cupboard or a community group that goes through glue faster than anyone expects.The formula is a solid, solvent free adhesive that glides on smoothly and dries clear, so finished work looks clean rather than patchy. It is acid free, which matters when you are mounting photographs or building a scrapbook that needs to survive a few decades without yellowing or corroding the materials underneath. The non-wrinkle characteristic means lightweight paper stays flat instead of buckling as the glue dries. The twist-up applicator keeps hands clean and lets you control how much stick is exposed at a time.Where to use itIndoors Scrapbooking, journaling and album building Cut and paste activities, school projects and classroom worksheets Paper craft, card making, collage and invitations Dry mounting photographs and artwork General office and stationery work on paper and light card OutdoorsNot recommended. This is a water soluble stationery adhesive with no weather or moisture resistance, so anything destined for outdoor exposure needs a different product.What it bondsPorous materials, including paper, cardboard, photographs, cellophane, crepe and tissue paper, foil and fabric. Surfaces need to be clean and dry for a reliable bond.How to use Check that both surfaces are clean and dry. Remove the cap and turn the base clockwise until a small amount of glue protrudes. Expose only what you need. Apply with firm, even strokes to one surface. Press the two surfaces together. Initial grab is roughly 20 to 40 seconds. Turn the base anti-clockwise to retract the glue and recap straight away so the stick does not dry out. Tip: if a stick has been left uncapped and has dried out, sitting it in warm water for a few minutes will usually bring it back rather than sending it to the bin.Important notes Designed for lightweight bonding. It is not suitable for heavy duty repairs or structural work. Not suitable for non-porous surfaces such as metal, glass or most plastics. No water resistance. Bonded work should be kept dry. Always recap after use. An uncapped stick will dry out. Store between 5°C and 30°C, out of direct sunlight. The formula contains corn starch. It is free from wheat, gluten, flour, egg and nut ingredients, though repeated or prolonged contact may cause an allergic reaction in susceptible people. Specifications Brand Bostik Product Glu Stik Pack 10 x 35g sticks Type Solid stick stationery adhesive Colour White stick, dries clear Solvent content Solvent free Acid free Yes Initial grab Approximately 20 to 40 seconds Clean up Warm soapy water Suitable surfaces Paper, cardboard, photographs, fabric Storage 5°C to 30°C, away from direct sunlight Compliance Tested to AS/NZS ISO 8124.3 (Safety of Toys, migration of certain elements) SafetyIt is non-toxic and solvent free, which is why it is cleared for classroom use, but it is still an adhesive and not a toy. Keep it out of reach of very young children, avoid eye contact, and do not eat it. Wash residue off skin and surfaces with warm soapy water. Refer to the Safety Data Sheet (SDS) for full details.
$43.00
Bear PVC Duct Tape is a tough, reliable, all purpose tape that delivers a strong hold and a clean finish for quick fixes. Ideal for sealing, bundling, patching, and general repairs at home, on site, and in the workshop. Its PVC backing resists moisture and abrasion, while the high tack adhesive bonds to a wide range of surfaces for dependable results. Why you will love it Fast grab for instant hold on contact Durable PVC backing resists scuffs, tears, and everyday wear Moisture resistant for confident indoor and short term outdoor use Conformable backing wraps neatly around pipes, ducts, and irregular shapes Easy to tear by hand for quick application without tools Low residue when removed from most clean surfaces Great for Sealing HVAC duct joins and flexible ducting Temporary patching of plastic sheeting, tarps, and covers Bundling cables, mats, and lightweight components Edge protection on cartons and packing jobs Quick fixes on site and around the home Works on Metal, plastic, vinyl, painted surfaces, cardboard, glass, masonry, timber, and more. For best results, surfaces should be clean, dry, and free of dust or oils. How to use Prepare the surface by cleaning off dust, grease, and moisture. Measure and tear the required length. Scissors are optional. Apply the tape with firm pressure, smoothing from the center outward to remove air pockets. Reinforce high stress areas with overlapping strips as needed. Pro tips Apply at room temperature for the best initial tack. On porous or rough surfaces, use extra pressure or a primer for maximum bond. For long term outdoor exposure, consider overcoating edges to limit water ingress. Typical specifications Backing PVC Adhesive Rubber based Total thickness Approx. 0.16 to 0.20 mm Temperature range Approx. −10 °C to +60 °C Finish Matte PVC Common sizes 48 mm width, 30 m length and other widths as available Colour Silver or Black depending on variant Values above are typical for PVC duct tapes and may vary by batch and width. FAQs Can I use it outdoorsYes for short term jobs. For permanent outdoor sealing, select a tape rated for UV and long term weather exposure. Will it remove cleanlyOn smooth, sealed surfaces it often removes with minimal residue. Always test on an inconspicuous area first. Is it suitable for high heatPVC duct tape is best within the stated temperature range. For sustained high temperature applications, choose a foil or specialty HVAC tape. Why buy from Glues Australia Trusted Australian supplier with fast dispatch Helpful support if you need sizing or product advice
$12.68 $9.27
Fast, tough and tidy. This bright white duct tape delivers a strong hold for patching, bundling, sealing and quick fixes indoors and outdoors. It tears by hand for easy application and leaves a clean look on light surfaces. Strong hold for everyday repairs and jobsite tasks Weather resistant backing that helps shed moisture UV resistant colour that stays bright in the sun Hand tear across or along the roll for fast use Conforms to rough, uneven and curved surfaces Clean white finish blends with trim, appliances and walls Great for Sealing and patching around the home, site and shed Temporary cable bundling and gear organisation Quick fixes on tools, hoses, tarps and camping gear Labelling and marking on light coloured surfaces Craft, props and event setups where a white finish is preferred Surface Compatibility Adheres to most clean, dry surfaces including metal, plastic, painted timber, vinyl, glass, masonry, cardboard and fabric. Not recommended on freshly painted walls, delicate finishes, porous stone or where residue free removal is essential. How to Use Clean and dry the surface. Remove dust, oil and loose flakes. Unroll and press the tape down firmly as you go to avoid air pockets. For heavy duty holds, wrap or overlap the tape to increase grip. To remove, lift a corner and peel back slowly at a low angle. Pro Tips At cooler temperatures, warm the tape and surface for best tack. For long term outdoor use, apply to smooth, sealed surfaces. Test first on sensitive areas to check finish and removal. Specifications Brand T-Rex Product type Duct tape Colour White Width 48 mm Length 9.1 m Use Indoor and outdoor Finish Matte white What is in the Box 1 x Roll of T-Rex White Duct Tape 48 mm x 9.1 m Frequently Asked Questions Will it hold in the rain?The backing helps resist moisture and the adhesive bonds well to dry, prepared surfaces. Apply to a clean, dry surface for best results. Is it paintable?Many users paint over duct tape for temporary cosmetics. For the best finish, use a suitable primer and test first. Will it leave residue?Like most strong duct tapes, residue can occur, especially after long exposure to heat and sun. Test on sensitive finishes and remove slowly.
$17.05 $14.74
Ramboard Joining Tape is the professional solution for connecting and securing surface protection sheets during construction, renovation, and painting projects. Designed for durability and clean removal, this high-performance tape ensures that your floor and surface coverings stay firmly in place without causing damage or leaving residue. Key Features Strong adhesive for secure bonding between Ramboard sheets Leaves no residue on most surfaces when removed properly Durable and tear-resistant for high-traffic job sites Easy to apply and unwind for fast installation 72mm width for reliable coverage and sealing Ideal For Construction and renovation projects Protecting floors, tiles, and finished surfaces Commercial and residential applications Why Choose Ramboard Tape? This joining tape is engineered to complement Ramboard surface protection products, delivering a tight seal that keeps dust, debris, and spills away from protected surfaces. It is designed to perform under tough site conditions while being easy to remove once the job is done. Specifications Width: 72mm Length: Varies by roll Colour: Brown Adhesive Type: Pressure-sensitive Residue-Free Removal: Yes Pro Tip For best results, apply Ramboard Joining Tape only to Ramboard and not directly to finished floors. Always ensure surfaces are dry and free of dust before application.
$30.65 $23.62
Keep jobs moving with a reliable, multipurpose PVC duct tape built for quick fixes and everyday maintenance. Paint Partner PVC Duct Tape bonds fast, conforms to uneven surfaces, and helps you seal, bundle, repair, and patch with confidence on site or at home. Why you will like it Strong instant hold grips to plastics, metal, timber, cardboard, and painted surfaces. Tear by hand for fast application when you do not have a knife handy. Flexible PVC backing conforms around pipes, ducts, cables, edges, and corners. Good weather resistance suitable for indoor use and light outdoor tasks. Clean removal designed to leave minimal residue when removed within a reasonable time. Low shine finish helps reduce glare on stage, sets, and job sites. Great for Sealing ducting joins and flexible hose connections Temporary patching of tarps, plastic sheeting, and packaging Bundling cables and securing drop sheets Edge protection on work surfaces and tool cases Quick fixes on site, in workshops, sheds, and vehicles Surface compatibility Adheres well to smooth, clean, and dry surfaces including PVC, PE sheeting, aluminium, steel, timber, painted walls, and cardboard. Test first on delicate or freshly painted areas. How to use Clean and dry the surface. Remove dust, oils, and loose paint. Unroll and tear or cut the required length. Press down firmly and smooth from the centre out to remove air pockets. For joints or patches, overlap edges by at least 20 mm. To remove, peel back slowly at a low angle. Remove within a reasonable time for the cleanest results. Tips For extra hold on porous surfaces, apply additional pressure with a roller. Avoid prolonged exposure to strong UV and high heat if a pristine finish is required. Not a substitute for permanent structural repairs or certified electrical insulation. Product details Backing PVC Adhesive Rubber based Finish Low sheen Use Indoor and light outdoor tasks Removal Minimal residue when removed within a reasonable time FAQs Is it waterproofIt resists moisture and splashes for temporary sealing. For long term underwater or high pressure sealing, choose a dedicated waterproof repair product. Can I paint over itMost paints will not adhere well to PVC tape. Remove the tape after painting or mask with a paintable tape. Will it damage surfacesOn most sound surfaces it removes cleanly when taken off in a reasonable time frame. Always test first on delicate, aged, or freshly painted surfaces. Good to know Store in a cool, dry place out of direct sunlight. Apply between 10°C and 35°C for best results.
$4.64 $3.63
Keep jobs moving with a reliable, multipurpose PVC duct tape built for quick fixes and everyday maintenance. Paint Partner PVC Duct Tape bonds fast, conforms to uneven surfaces, and helps you seal, bundle, repair, and patch with confidence on site or at home. Why you will like it Strong instant hold grips to plastics, metal, timber, cardboard, and painted surfaces. Tear by hand for fast application when you do not have a knife handy. Flexible PVC backing conforms around pipes, ducts, cables, edges, and corners. Good weather resistance suitable for indoor use and light outdoor tasks. Clean removal designed to leave minimal residue when removed within a reasonable time. Low shine finish helps reduce glare on stage, sets, and job sites. Great for Sealing ducting joins and flexible hose connections Temporary patching of tarps, plastic sheeting, and packaging Bundling cables and securing drop sheets Edge protection on work surfaces and tool cases Quick fixes on site, in workshops, sheds, and vehicles Surface compatibility Adheres well to smooth, clean, and dry surfaces including PVC, PE sheeting, aluminium, steel, timber, painted walls, and cardboard. Test first on delicate or freshly painted areas. How to use Clean and dry the surface. Remove dust, oils, and loose paint. Unroll and tear or cut the required length. Press down firmly and smooth from the centre out to remove air pockets. For joints or patches, overlap edges by at least 20 mm. To remove, peel back slowly at a low angle. Remove within a reasonable time for the cleanest results. Tips For extra hold on porous surfaces, apply additional pressure with a roller. Avoid prolonged exposure to strong UV and high heat if a pristine finish is required. Not a substitute for permanent structural repairs or certified electrical insulation. Product details Backing PVC Adhesive Rubber based Finish Low sheen Use Indoor and light outdoor tasks Removal Minimal residue when removed within a reasonable time FAQs Is it waterproofIt resists moisture and splashes for temporary sealing. For long term underwater or high pressure sealing, choose a dedicated waterproof repair product. Can I paint over itMost paints will not adhere well to PVC tape. Remove the tape after painting or mask with a paintable tape. Will it damage surfacesOn most sound surfaces it removes cleanly when taken off in a reasonable time frame. Always test first on delicate, aged, or freshly painted surfaces. Good to know Store in a cool, dry place out of direct sunlight. Apply between 10°C and 35°C for best results.
$4.55 $3.63
Keep notes, artwork, bills and reminders up where you can see them without nails or mess. Command Spring Clips grip paper and lightweight items securely, then remove cleanly when you are ready for a change. Ideal for kitchens, study corners, classrooms, rentals and offices. Why you will like it Damage free hanging on most painted walls, tile, metal and glass Holds firmly, then removes cleanly with no sticky residue Simple squeeze to clip, easy lift tab to remove the strip Clean white finish that blends with any space Great for lists, rosters, kids art, mail and reminders What is in the box 8 × Command Spring Clips, White 12 × Command Adhesive Strips Model number: 17089-8ES Recommended uses Pin timetables on pantry doors Display school notes near the entry Hold recipes at eye level while you cook Organise invoices and mail by the desk Where it works Most painted drywall, finished wood, tile, metal, glass Where not to use Wallpaper, brick, rough or textured surfaces Walls painted with non stick or low VOC paints that resist adhesives Wet areas that stay steamy for long periods How to apply Clean the surface with methylated spirits or isopropyl alcohol. Let it dry. Peel the liner marked “wall” and press the strip to the wall for 30 seconds. Peel the other liner and press the clip base to the strip for 30 seconds. Slide the clip onto its base and wait 1 hour before use for best hold. How to remove cleanly Hold the clip gently so it does not spring off. Grip the tab and pull the strip straight down, slowly, keeping it flat against the wall until it releases. Good to know Use a fresh strip if you reposition the clip Do not hang valuable or irreplaceable items Test first on an inconspicuous spot if unsure about the surface Specs Finish White Pack contents 8 clips, 12 adhesive strips Model 17089-8ES Room Kitchen, study, office, classroom Surface type Most smooth, sealed surfaces Tips for best results Apply to clean, dry, cool surfaces Wait the full hour before clipping items Replace strips if the clip is moved to a new spot
$45.00
Make fast, tidy bonds on timber, plastics, ceramics and more with the Ozito Power X Change 18V Cordless Glue Gun. It heats up in about 120 seconds and uses standard 11 mm glue sticks, so you can tackle DIY fixes, craft projects and light repairs without cords getting in the way. Why you will love it Cordless convenience for indoor and outdoor jobs Quick heat up in about 120 seconds for less waiting Consistent flow control trigger for neat, accurate beads and dots Interchangeable nozzles round and precision tips included for detail work LED worklight helps you see the glue line clearly Auto shut off after inactivity to help conserve battery Part of Ozito PXC one battery system across tools and garden gear What is in the box Ozito PXC Cordless Glue Gun (skin only) 5 x 11 mm glue sticks Round nozzle and precision nozzle 13 mm hex spanner Ideal for Timber trims, skirting, craft and hobby builds Quick fixes on ceramics and some plastics Cardboard, fabric trims and school projects Key specifications Battery platform Ozito Power X Change 18V Pre heating time Approx. 120 seconds Max heating temperature 170°C Glue stick size 11 mm diameter Weight 0.4 kg Auto power off Yes, after inactivity Battery and charger sold separately. How to use Insert a charged PXC 18V battery and press the on or off button. Wait until the status light indicates ready, about 2 minutes. Feed an 11 mm glue stick and squeeze the trigger to apply glue. Press surfaces together straight away and hold for about 30 seconds. Stand the tool upright on the battery between uses and let it cool before storage. Good to know Use the precision nozzle for fine detail and the round nozzle for general bonding. Work on clean, dry surfaces for the best adhesion. Wear eye protection, take care around hot glue and hot nozzle areas. Warranty Tool is covered by a 5 year replacement warranty for DIY use. PXC lithium batteries and chargers are covered by a 36 month warranty. Keep your proof of purchase.
$52.48
Boyle Gloss All in One Glue Sealer and Finish 236 ml Seal, glue and finish your craft projects with a single water based formula that dries clear and glossy. Boyle Gloss All in One is ideal for decoupage, paper craft, school projects and home decor. It brushes on smoothly, holds strongly and leaves a protective shine. Key benefits Three in one formula for gluing, sealing and top coating Gloss finish that dries clear and enhances colours Water based and low odour for indoor use Brushes on easily and levels well Great for beginners and experienced makers Best for Decoupage and collage Paper, card and photos Wood, MDF and craft boards Canvas and fabric accents Lightweight embellishments and mixed media Surface compatibility Use on clean, dry and dust free surfaces. Test on a small area first, especially on delicate papers, prints or dyed fabrics. How to use Prepare: Ensure the surface is clean and smooth. Cut and position your paper or embellishments. Glue: Apply a thin even coat to the surface with a soft brush. Press the item in place and smooth out any bubbles. Seal: After the glue layer sets to tack free, brush a light coat over the top. Allow to dry fully. Finish: Add 1 to 3 additional thin coats for a stronger, glossier finish. Lightly sand between coats if a super smooth result is desired. Dry time and coverage Touch dry in about 15 to 30 minutes depending on coat thickness and conditions Recoat after 30 to 60 minutes Allow 24 hours before light handling. Full cure develops over several days Coverage varies with technique. Thin coats give the best clarity and bond Clean up Wash brushes and tools with warm soapy water while wet Wipe any fresh drips with a damp cloth Tips for a glossy result Apply multiple thin coats rather than one heavy coat Work in one direction for the first coat, then cross coat for the second Use a soft synthetic brush or foam applicator to minimise brush marks Important information For indoor craft use Keep out of reach of children Avoid freezing. Store upright with the cap closed tightly Specifications Type: All in one glue, sealer and finish Finish: Gloss clear Base: Water based Size: 236 ml
$11.00
Stanley 12mm 240V Corded Hot Glue Gun 25W Get clean, reliable bonds for crafts, quick household fixes, packaging, and light DIY with the Stanley 12mm Corded Hot Glue Gun. Its 25W heating element warms up efficiently for steady glue flow, while the compact body and ergonomic trigger deliver comfortable, controlled application on a wide range of surfaces. Why choose this glue gun Trusted Stanley build for everyday projects and repairs Consistent glue output for neat, repeatable results Easy to handle for beginners and experienced makers Key features 12 mm glue sticks for great coverage and fewer reloads 25W heating element for steady melt and controlled flow Ergonomic trigger that reduces hand fatigue on longer runs Built in stand and nozzle shroud to help keep benches tidy 240V corded power for uninterrupted operation Great for Cardboard, paper, fabric, felt, foam, ribbons, and craft materials Wood trims, light plastics, small fixtures, and packaging General household touch ups and temporary jigs How to use Insert a 12 mm glue stick into the feed port. Plug into a 240V outlet and allow the tool to preheat. A few minutes is typical. Gently squeeze the trigger to dispense glue. Apply in small beads or dots. Press parts together while the adhesive is hot. Hold until initial grab occurs. Rest the tool on the built in stand when not dispensing. Unplug after use. Compatibility Uses standard 12 mm hot melt glue sticks. Works with multi purpose, high tack, wood, and craft grade sticks. For heat sensitive substrates such as very thin plastics or delicate fabrics, test on a small area first. Specifications Power 25W Voltage 240V AC Glue stick size 12 mm diameter Nozzle Precision tip with protective shroud Stand Integrated flip down stand Cord Mains corded Typical applications Crafts, packaging, light repairs What is in the box Stanley 25W 12 mm Hot Glue Gun User guide Glue sticks sold separately Helpful tips Keep the nozzle clean by wiping away stringing while warm using a scrap of cardboard. For porous materials like fabric or raw timber, apply a slightly thicker bead. For smoother finishes on visible joints, apply small dots and press evenly. Safety and care Hot melt adhesive and nozzle become very hot. Avoid contact with skin. Use on a stable, heat resistant surface. Keep out of reach of children. Unplug after use and allow to cool before storage. FAQ Q: Can I use smaller mini sticks? A: This tool is designed for 12 mm sticks. Using other sizes can cause feed issues. Q: How long do I have to position parts? A: Open time varies by stick type and temperature. Work quickly and test first on your material. Note: Always test bond strength and heat suitability on an offcut before full application.
$44.10
Dunlop Gripper Fast Tile Adhesive 500 ml Overview Dunlop Gripper Fast Tile Adhesive 500 ml is a high quality multipurpose adhesive designed to deliver consistent, reliable bonding performance for trade professionals and serious DIYers. It is formulated for dependable adhesion, easy application, and clean finishing so you can complete jobs with confidence and minimal rework. Why choose this product Reliable bond performance supported by proven chemistry and rigorous quality control. Smooth, predictable application that helps reduce mess and cleanup time. Versatile adhesion profile suited to a wide range of substrates and project types. Clear guidance on surface preparation, application method, and curing to help achieve the best possible result. Suitable for residential fit-outs, maintenance, repairs, and light commercial projects. Suitable materials common building materials ceramics wood metals some plastics stone Typical applications General installation, repair, and maintenance where a durable bond is required. Interior work that benefits from a neat finish and tidy joints. Projects where dependable initial grab and high final strength are important. Surface preparation Ensure all surfaces are clean, sound, and dry. Remove dust, oil, release agents, laitance, and any loose or flaky material. For dense or non-porous surfaces, light abrasion improves key. Test adhesion on a small area if you are unsure about compatibility. Observe local safety requirements when sanding or cutting. Application Check ambient and substrate temperature. Apply between 10°C and 30°C. Cut the nozzle to the required bead size or prepare the container according to the product type. Apply an even bead or spread with a suitable trowel where required. Avoid trapping air. Press the materials together, ensuring full contact. For sheet goods, roll firmly to promote transfer and wetting. Support, clamp, or brace as needed until the adhesive develops sufficient handling strength. Cure and working time Cure time varies with product and conditions. Allow adequate time before loading or finishing. Cooler temperatures and high humidity will slow curing, while warmer, drier conditions accelerate it. Do not load or finish until the bond has developed adequate strength. Always follow best practice for ventilation and safe handling during cure. Coverage Coverage varies based on substrate profile, bead size, and installation method. As a guide, a 300 ml cartridge with a 6 mm round bead can lay several linear meters. For trowel applied adhesives, a notched trowel pattern will influence yield. Plan to have extra on hand for porous or uneven surfaces. Limitations Do not apply to surfaces that are visibly wet unless the product specifically allows damp application. Avoid continuous water immersion unless the product is rated for that exposure. Not all plastics are compatible; test on polypropylene, polyethylene, and PTFE if required. Observe maximum service temperature and any movement or vibration limits appropriate to the application. Clean up Clean uncured product with a suitable solvent or water as applicable. Always read the product label and follow local regulations for disposal of leftover material and containers. Safety Read the label before use and keep out of reach of children. Use in a well ventilated area. Wear protective gloves and eye protection. Do not ingest. Refer to the Safety Data Sheet (SDS) for full details. Storage Store upright in a cool, dry place away from direct sunlight and heat sources. Keep the cap or nozzle tightly closed when not in use. Do not allow to freeze unless the product literature states it is freeze-thaw stable. Rotate stock to use older product first. Troubleshooting Poor adhesion: Check surface prep, remove contaminants, and reapply with firm pressure. Slow cure: Verify temperature and humidity. Increase airflow or allow more time. Excess squeeze-out: Reduce bead size or spread more evenly. Clean residue before it skins. Frequently asked questions Can I paint over it? Many adhesives can be overcoated once cured. Test a small area with your paint system first. Is it suitable outdoors? Check the product label for outdoor rating. Protect fresh adhesive from rain until cured. What is the service temperature range? Typical service ranges suit most building environments. Avoid direct flame or extreme heat. How do I remove cured material? Mechanical methods are usually required. Work carefully to avoid damaging surrounding finishes. Why buy from Glues Australia We curate a focused range so you can choose faster and build better. Every product listing includes practical how to detail, compatibility guidance, and straightforward support from a team that understands trade requirements. Order with confidence and get your project moving.
$32.80
Bostik Green Stik is an easy to use glue stick for everyday crafting, school projects, and office tasks. It applies smoothly, goes on clear, and dries clear for a neat finish. Why you will love it Non toxic and acid free Smooth application with strong initial tack Ideal for paper crafting, cut and paste, and classroom use Low mess and easy to control for kids and adults Surfaces Paper Cardboard Light fabric and similar porous materials How to use Ensure surfaces are clean, dry, and free from dust. Twist the base to raise the glue. Apply a thin, even layer to one surface. Press surfaces together firmly for several seconds. Allow to dry. For best results on heavier paper, apply to both surfaces. Clean up Wipe away excess with a damp cloth while still wet. Allow to dry fully before handling. Environment and packaging Formulated with a high percentage of natural ingredients Packaged in a recycled plastic container with soy ink label Packaging is curbside recyclable in many areas when the lid is attached Good to know Colour when applied: clear Dries: clear Size: 35 g
$4.95
Bostik Pink Stik is a neat, no-mess glue stick that goes on pink so coverage is easy to see, and dries pink to add fun colour to your creations. Perfect for school projects, craft, scrapbooking and everyday office use. Why you will love it Goes on pink and dries pink Smooth application with quick grab Non toxic and acid free Low mess twist up tube Washable from hands and most fabrics Best for Paper, card and photos School assignments and scrapbooks Office presentations and collages How to use Ensure surfaces are clean, dry and free from dust. Twist up a small amount of glue and apply a thin, even coat to one surface. Join surfaces and press firmly. For heavier card, apply to both surfaces. Replace cap after use to prevent drying out. Clean up and safety Fresh glue washes off skin with soap and water. Wipe excess from surfaces with a damp cloth before it dries. Keep out of reach of young children when not in use. Specifications Brand Bostik Product Pink Stik Glue Stick Size 35 g Colour (wet) Pink Colour (dry) Pink Suitable materials Paper, card, photos, light fabrics Not recommended for glossy plastics, foam, or other non porous surfaces where a stronger adhesive is required.
$4.95
![Bostik Blu Tack Reusable Adhesive 75g [Pink]](http://gluesaustralia.com.au/cdn/shop/files/BOBLUTACGN_05.jpg?v=1760306853&width=645)
Why you will love it Reusable and repositionable No pins or tape required Low mess with easy clean up Holds posters, photos, notes, and lightweight items Malleable for custom shapes and small gap fixes Ideal uses Posters and signs on painted walls, tiles, glass, and metal Securing items on desks and shelves Keeping cables tidy and in place Crafts, school projects, and model making How to use Ensure surfaces are clean, dry, and free from dust or grease. Pinch off a small piece and knead until soft and warm. Form into a ball and place on the item to be mounted. Press firmly to create a good bond. Use more for heavier items. Removal tips Peel off slowly by rolling the adhesive away from the surface. If residue remains, dab with a fresh piece to lift it. Test on delicate or matte paints in an inconspicuous area first. Good to know Not suitable for highly absorbent, recently painted, or dusty surfaces. Avoid use on silk screens, flocked or delicate wallpapers, and porous finishes. Store in a cool place inside the pack for best performance. Specifications Type Reusable adhesive putty Colour Pink Pack size 75 g
$6.50
![Bostik Blu Tack Reusable Adhesive 75g [Orange]](http://gluesaustralia.com.au/cdn/shop/files/BOBLUTACGN_04.jpg?v=1760306533&width=645)
Why you will love it Reusable and repositionable No pins or tape required Low mess with easy clean up Holds posters, photos, notes, and lightweight items Malleable for custom shapes and small gap fixes Ideal uses Posters and signs on painted walls, tiles, glass, and metal Securing items on desks and shelves Keeping cables tidy and in place Crafts, school projects, and model making How to use Ensure surfaces are clean, dry, and free from dust or grease. Pinch off a small piece and knead until soft and warm. Form into a ball and place on the item to be mounted. Press firmly to create a good bond. Use more for heavier items. Removal tips Peel off slowly by rolling the adhesive away from the surface. If residue remains, dab with a fresh piece to lift it. Test on delicate or matte paints in an inconspicuous area first. Good to know Not suitable for highly absorbent, recently painted, or dusty surfaces. Avoid use on silk screens, flocked or delicate wallpapers, and porous finishes. Store in a cool place inside the pack for best performance. Specifications Type Reusable adhesive putty Colour Orange Pack size 75 g
$6.50
Key features Dries clear for a neat, invisible finish Non toxic and low odour Water based for easy clean up before curing Suitable for brush or nozzle application Paintable when dry Strong bond on porous surfaces Ideal for Paper, cardboard, photos, and scrapbooking Craft foam, felt, and fabric edge bonding Balsa wood and other light timbers School and hobby projects Directions Ensure surfaces are clean, dry, and free of dust or oil. Apply a thin, even coat to one surface. For very porous materials, coat both surfaces. Join pieces while the glue is wet and press firmly. Clamp or weight if needed. Wipe away excess with a damp cloth. Allow to set. Light handling is typically possible after 30 to 60 minutes. Full strength develops after 24 hours. Clean up Clean tools and fresh spills with a damp cloth. Once cured, scraping or sanding may be required. Handy tips For stronger joints on timber, lightly sand and dry fit pieces before gluing. Avoid excessive glue, which can lead to slow drying and warping on thin paper. Not suitable for continuous water immersion or load bearing joins. Storage Replace cap after use. Store upright in a cool, dry place away from frost and direct heat. Safety Non toxic formula. If irritation occurs, discontinue use. Technical details Base PVA emulsion Appearance White, dries clear Viscosity Medium, smooth flow Open time Up to 10 minutes depending on surface and coat weight Set time Approx. 30 to 60 minutes Full cure 24 hours Water resistance Not recommended for prolonged moisture exposure Paintable Yes, once fully dry
$11.30
Bostik Hobby Craft Dual Tip Liquid Glue 30ml is the perfect choice for creative projects, crafts, and schoolwork. Designed for precision and versatility, this liquid glue features two applicator tips, a fine tip for detailed work and a broad tip for larger surfaces. The smooth, clear formula ensures a clean, professional finish without clumping or streaks. Dual applicator design: Fine and broad tips for all craft needs Clear drying: Leaves no visible residue Ideal for: Paper, cardboard, photos, and light craft materials Easy to use: Non-toxic, washable, and child-friendly Perfect for school and home projects This handy 30ml bottle is compact and easy to store, making it a must-have for hobbyists, students, and anyone who loves crafting. Its dual-tip applicator provides control and convenience whether you're gluing delicate details or covering larger areas. Applications: Arts and crafts, card making, scrapbooking, paper modeling, and DIY projects. Brand: Bostik
$5.88
Bring colour to craft time with Bostik Glu Stik Rainbow. These smooth-gliding, non toxic glue sticks make school projects, scrapbooks, posters and office tasks quick and tidy. They go on smoothly, dry clear and are washable from hands and most fabrics, making them ideal for kids and classrooms. Key features Vibrant rainbow set for fun, easy-to-see application Non toxic and solvent free for peace of mind Dries clear for a neat, professional finish Low mess stick format with twist up design Washable from hands and most washable fabrics Acid free formula suitable for photos and paper crafts Best for Paper, cardboard and lightweight craft foams School homework, posters and collages Scrapbooking and photo mounting Office and home stationery tasks How to use Ensure surfaces are clean, dry and free of dust. Twist base to expose glue and apply a thin, even coat to one surface. Press surfaces together and smooth from the center outward. Allow to dry. For heavier paper, hold or weight for a stronger bond. Clean up Wipe away excess with a damp cloth while wet. Wash hands with warm soapy water. On washable fabrics, pre treat with stain remover and launder according to garment instructions. Helpful tips Replace cap firmly after use to prevent drying out. Use on porous, lightweight materials only. Not suitable for metal, glass or heavy plastics. Test on a small area of delicate papers or photos first. Specifications Format Glue sticks Pack size 5 sticks Stick weight 35 g each Colour Rainbow set. Dries clear Solvent Solvent free pH Acid free Safety: Keep out of reach of young children when not in use. Do not ingest. If irritation occurs, discontinue use.
$18.00
Key features Goes on blue, dries clear for easy, mess free gluing Non toxic, acid free and solvent free Fast drying with a strong hold on porous materials Allows brief repositioning before it sets Twist up stick with tight sealing cap to prevent drying out Low mess and easy to use for kids and adults Great value multi pack for classrooms and home offices Ideal for Paper and cardboard Photos and craft paper Lightweight fabric embellishments School assignments, posters and scrapbooks Directions Surfaces should be clean, dry and free of dust. Uncap and twist the base to raise the glue. Apply a thin, even layer to one surface. Join parts and press firmly for several seconds. Allow to dry. Full strength is reached after the glue has set clear. Clean up and safety Wipe fresh residue with a damp cloth. Wash hands and tools with warm soapy water. Keep capped when not in use. Keep out of reach of young children. Good to know Not recommended for non porous surfaces like metal or glass. For best results, store in a cool, dry place. Pack contents 5 glue sticks x 35 g each.
$23.00
Bostik Spray Adhesive is a clear, fast-tack, multi purpose aerosol glue designed for quick and easy bonding of lightweight materials. Ideal for craft, school, office, and general household repairs where a neat, even spray is preferred. Why you’ll love it Fast tack with strong initial grab Clear, low-mess spray pattern for even coverage Adjustable bond: reposition briefly, then press firm Non-staining on most materials Great for large areas and edge-to-edge laminations Suitable materials Paper, cardboard, photos, craft foam, felt, fabric, foil, leather, cork, many plastics, wood, and light laminates. Always test on delicate or coated surfaces. Typical uses Mounting posters, photos, and presentations Craft projects and scrapbooking Attaching fabric or felt to displays Temporary positioning before stitching or stapling How to use Ensure surfaces are clean, dry, and free of dust or oil. Shake the can well before and during use. Hold 15–20 cm from the surface and spray a light, even coat. For temporary bonds, spray one surface only and join after 10–30 seconds tack time. For stronger bonds, spray both surfaces, allow to go tacky, then press together with firm, even pressure. Drying and cure Tack time: typically 10–60 seconds depending on coat weight and conditions Handling strength: a few minutes Full bond development: 24 hours Clean up While wet, wipe overspray from hard surfaces with a suitable adhesive remover or mineral turpentine, then wash with warm soapy water. Test cleaners on an inconspicuous area first. Good to know Clear finish when dry Best at room temperature with good ventilation Not recommended for high heat, heavy structural loads, or polyethylene and polypropylene unless tested Storage and safety Store upright in a cool, dry place away from heat and flame. Use only in well ventilated areas. Avoid inhalation and contact with eyes or skin. Keep out of reach of children. Press nozzle briefly upside down after use to clear. Specifications Format: Aerosol spray Colour: Clear Size: 350 g
$35.00
Bostik Glu Tape is a clean, quick and mess free double sided adhesive for everyday sticking and craft projects. At 6 mm wide and 12 m long, it gives precise control for cards, scrapbooks, posters, school projects and office tasks. Why you will love it Instant stick with no drying time Clean finish with no liquid glue spills Thin 6 mm width for neat, accurate placement Strong hold on most paper and lightweight materials Great for home, school and office use Great for Card making and scrapbooking Mounting photos, prints and posters Sealing envelopes and gift wrapping School assignments and craft projects Suitable surfaces Paper and cardboard Lightweight foam and foamboard Most coated papers and photo papers How to use Ensure surfaces are clean, dry and free of dust or oils. Apply the tape along the area to be bonded, pressing down firmly. Peel away the release liner if present, then align and press surfaces together. Rub over the bond area to secure a strong hold. Tips Test on delicate or coated papers before full application. For best results, apply at room temperature and avoid stretching the tape. Store in a cool, dry place out of direct sunlight. Specifications Type: Double sided adhesive tape Width: 6 mm Length: 12 m Color: Clear adhesive Pack contents: 1 roll
$10.60
Keep your glue gun ready for any project with the Bostik HG3 Glue Gun Refills. These high quality hot melt sticks provide a smooth, even flow for clean and reliable bonding. Pack of 10 clear adhesive sticks Compatible with Bostik HG3 Glue Gun Creates a strong, flexible and transparent bond Suitable for wood, plastic, fabric, leather, ceramics and more Perfect for craft work, household repairs and DIY projects. The hot melt formula ensures quick adhesion with minimal mess, giving you professional results every time. How to use: Insert a glue stick into the back of your glue gun. Allow the gun to heat for a few minutes before use. Apply steady pressure on the trigger to release glue. Join surfaces immediately for best results. Let the glue cool completely before handling. Safety Information: Hot glue can cause burns. Avoid contact with skin and eyes. Keep out of reach of children. The Bostik HG3 Glue Gun Refills are ideal for quick fixes, decorative projects and reliable everyday bonding.
$15.21
Key benefits Goes on purple, dries clear for easy, accurate application Low mess, quick grab on paper and card Washable formula that cleans up with water Solvent free and non toxic, suitable for school use Twist up stick for smooth, even coverage Great value multi pack for home, school, and office Best for Paper and cardboard Photos and scrapbooking Homework and classroom crafts Gift wrapping and arts projects How to use Ensure surfaces are clean, dry, and free from dust. Twist the base to raise the stick a few millimetres. Apply an even coat to one surface using light pressure. Join within 30 seconds and press firmly along the bond line. Allow to dry. Handling strength is reached in minutes, full bond develops as it cures. Clean up and storage Fresh residue wipes away with a damp cloth. Wash hands and tools with water. Replace cap after use to prevent drying out. Store upright in a cool, dry place. Typical details Format Solid glue stick Colour when applied Colours Colour when dry Clear Set time Minutes, depending on coat weight and ambient conditions Clean up Water while wet Suitable materials Paper, card, photos, light crafts Not recommended for Non porous surfaces, heavy materials, or outdoor use Pack contents 4 x 8 g glue sticks
$7.77
Weldbond is a universal adhesive for gluing a variety of materials. Wood, tile, glass, plaster, cork, slate, brick, concrete block, linoleum, clay tile, ceramics, fabrics, and more. About the product Works as a sealer, bonding agent, or primer Completely non-toxic Dries to a clear, flexible bond Works on porous and non-porous surfaces UL approved Will not dissolve hard foam Safe for Styrofoam Works well with Plastics and expanded polystyrene Frequently Asked Questions Can I keep my weldbond bottle outside in the garage? Will it freeze? Weldbond should be protected from the cold as it will freeze. Once frozen, this product loses all adhesive capabilities. It should be stored above 50°f/ 10°c at all times. Also, after the container has been opened, ensure it is closed tightly after each use. What is the shelf life of weldbond? Weldbond typically has a shelf life of 5 years. If the product is starting to solidify, it can be restored by adding just a little bit of water. We advise the consumer to give the container a good shake prior to every use. Is weldbond non-toxic? Weldbond has been tested to be non-toxic. Weldbond conforms to astm d4236. Is weldbond tested on animals or created with any animal by-products? Weldbond is not tested on animals and does not contain any animal by-products. This product is vegan-friendly.
$24.43
The UNi-PRO snap blade knife is the perfect tool for all your tasks. From opening packages to cutting string, this durable and convenient multi-purpose knife will make life easier!
$6.50
Blue glue stick "Made in Germany" where you directly see where you glue. Applies blue and magically dries clear. With an unique screw cap that prevents glue from drying out. The glue formula consists of 70% natural ingredients (including water) and is solvent free. Glues strong, fast and durable, glides smoothly, is highly efficient and of course cold washable. For use at home, at school and in the office. Materials Glues paper, cardboard, photos, Styrofoam®, labels, etc. Use and Handling Instructions UHU stic Magic is applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue. The blue colour disappears a few seconds after application and is completely transparent when dry. Features: Applies blue and magically dries clear Glue formula with 70% natural ingredients Glues fast, strong and durable Screw cap prevents glue from drying out
$3.50
Powerful universal adhesive for most plastics. Cold welding technology for a perfect bond. Ideal for multi-purpose domestic applications, handicraft work, repairs and model building. The hard but flexible adhesive film remains transparent. Water and temperature resistant. Toluene free. YOU CAN FIX IT! Glues most usual plastic materials (ABS, Plexiglas®, hard PVC...), also in combination with wood, metal, glass and ceramics. *Not suitable for PE, PP and Styrofoam.
$12.77
HandiTAK® is non-toxic, acid and lignin free. This reusable adhesive replaces tape, pushpins and tacks. It works on most surfaces and is great for securing pictures, keys, pens and lots of other items. Simply knead a small piece of HandiTAK® into a ball, place it between surfaces to be fastened and press firmly. Works best on: China, Crystal, Greeting Cards, Notes, Party Decorations, Posters, Straighten Pictures, Telephone, Pads Pacer Technology Super Glue’s HandiTak (HT, HT2) is a non-toxic (conforms to ASTM D-4236) reusable adhesive that replaces tape, pushpins and tacks and works on most surfaces. Properties: Appearance - yellow rubber-based mounting tape with a mild odour. (Note: contains a synthetic rubber ingredient with no natural latex). Instructions: 1. Knead a small piece of HandiTak into a ball, place it between surfaces to be fastened, and press firmly. 2. To remove HandiTak, gently roll product into a ball and lift from the surface. Use the ball to aid in removing any remaining product. SAFETY AND HANDLING PRECAUTIONS Contains rubber-based hydrocarbon mixture. Caution: HandiTak may leave some oily residue on some surfaces. If this happens, use Lighter Fluid or mineral spirits to remove residue. Do not use HandiTak on soft-flocked wallpaper, newly painted surfaces, or for hanging heavy objects such as mirrors and framed pictures. Avoid prolonged skin contact.
$8.50
Please refer to the photo of the back of the pack for indications and instructions
$15.00
You have seen 96 out of 146 products
Options for cartons, models and displays where fast handling and clean bonds are key. Choose PVAs, hot-melt sticks, contact sprays or double-sided tapes based on area and load. Reinforced mounting tapes help with signage; select clear-drying for visible seams. Avoid over-wetting to prevent warping. Use the filters to narrow by chemistry, cure speed, temperature rating and clean-up. Always check the product page and TDS/SDS for suitability and instructions.
