The Dunlop Sponge Float is a high-quality finishing float built to produce the classic sponge-finished render surface. Its clever design pairs a sponge face with a perforated aluminium backing plate that allows water to transfer through the back of the float, keeping the sponge working wet so it glides across the render and lifts a fine, even texture rather than tearing the surface.Where to use itUse the sponge float in the final stage of rendering, once the render has firmed enough to be rubbed up. Worked in light circular motions with clean water, it evens out the surface and produces the uniform sponge texture popular on rendered exterior walls. It suits professional renderers chasing a consistent finish as well as DIY users rendering fences, feature walls and home exteriors.Features High-quality sponge float for a sponge-textured render finish Perforated aluminium plate allows water transfer through the back of the float Unique ErgoGrip handle for comfortable, controlled use Ideal for render projects large and small Trade-quality Dunlop construction CareRinse the sponge thoroughly after every session so render particles do not cure inside it, and flush the perforated plate clear at the same time. Squeeze out excess water, let the float air-dry sponge-side up, and store it away from sunlight to stop the sponge hardening or crumbling.
$32.88
The Dunlop Scoop is a high-strength steel scoop designed for renderers and plasterers who need to move, measure and load mixed product quickly and cleanly. Fitted with Dunlop's ErgoGrip handle, it sits comfortably in the hand and stands up to the daily punishment of scooping heavy render, plaster and dry powders on site, helping you keep the job moving with less mess and less strain.Where to use itUse the scoop to transfer dry render, plaster and cement-based powders from bags into mixing buckets, to load mixed product onto a hawk, or to portion material during batching. It is equally handy for tiling and floor-levelling work where accurate, tidy handling of powders and mixed product saves time and reduces waste on both indoor and outdoor jobs.Features High-strength steel construction for lasting durability Comfortable ErgoGrip handle Ideal for renderers and plasterers Makes batching and transferring product faster and cleaner Quality trade-grade tool CareScrape and rinse off render or plaster before it cures, since set material is hard to remove and adds weight to the tool. Dry the steel thoroughly after washing to prevent surface rust, and store it in a dry place with your other rendering tools.
$36.38
The Dunlop Finishing Trowel is a premium stainless steel trowel built to deliver a smooth, professional-grade finish on rendered and screeded surfaces. Its high-strength blade holds a true, flat edge under pressure, while the exposed rivets give visible reassurance of the tool's build quality. The moulded ErgoGrip handle keeps your wrist comfortable through long passes across walls and floors, making it a reliable everyday trowel for renderers, plasterers and serious DIYers alike.Where to use itReach for this trowel whenever you are applying or finishing renders and screeds, indoors or out. It is ideally suited to smoothing acrylic and cement-based renders on walls, flattening floor screeds, and achieving that final glass-smooth pass that separates a professional job from an average one. It pairs naturally with Dunlop render products and a renderer's hawk.Features High-strength stainless steel blade for a superior finish Exposed rivets for visible strength and durability Comfortable ErgoGrip handle reduces hand fatigue Ideal for renders and screeds Premium trade-quality construction CareWash render or screed residue off the blade with clean water before it sets, as cured material is difficult to remove and can pit the surface. Wipe the trowel dry after cleaning and store it flat in a dry place to keep the blade true and rust-free.
$53.63
The Dunlop Wooden Float is crafted from hard-wearing European Beechwood, giving it the slightly open texture that renderers and concreters rely on to close up, flatten and evenly finish freshly applied surfaces. Combined with Dunlop's comfortable ErgoGrip handle, it is a simple, durable tool that helps you work render, concrete and screed to a consistent, professional standard without hand fatigue.Where to use itUse the wooden float for rubbing up and finishing renders on walls, smoothing concrete slabs and paths, and levelling floor screeds. The timber face is particularly good at bringing render to an even, uniform texture before a final sponge or steel-trowel pass, making it a staple for rendering, concreting and general masonry work indoors and outdoors.Features Hard-wearing European Beechwood face Comfortable ErgoGrip handle for extended use Ideal for renders, concrete and screeds Produces an even, consistent surface texture Trade-quality construction at a practical price CareRinse render and concrete off the timber face before it hardens, then allow the float to air-dry fully before storing. Avoid soaking the float for long periods, as excess water can swell or warp the timber. Store it flat in a dry spot away from direct heat.
$54.00
The Dunlop Plastic Float is a quality PVC finishing float designed to close up and smooth freshly applied render. Its lightweight plastic blade glides over the surface without dragging, helping you flatten trowel marks and bring the wall to an even, uniform texture ready for its final finish. Being PVC, it is easy to keep clean and will not rust or swell like some traditional float materials.Where to use itUse it as the render begins to firm up, working the float in even, circular passes to smooth and consolidate the surface. It is ideal for acrylic and cement-based render projects on exterior and interior walls, and its light weight and simple handling make it just as suitable for first-time DIY renderers as for the professionals who use it every day.Features Quality PVC construction for a smooth render finish Lightweight and comfortable to work with over large wall areas Non-rusting, easy-clean plastic blade Ideal for render projects and general finishing work Trade-quality Dunlop tool at a DIY-friendly price CareWash render residue off the blade with water immediately after use, before it can cure onto the plastic. Avoid scraping the face with metal tools, let the float dry fully, and store it flat away from heat so the blade stays straight and smooth.
$23.41
The Dunlop Renderers Brush is a trade-quality wetting brush made with natural palm fibre bristles that hold plenty of water. Damping down a wall before render goes on is one of the simplest ways to improve adhesion and workability, and this brush makes that step quick and even, laying down consistent moisture across brick, block and other masonry surfaces before you start applying render.Where to use itReach for this brush at the start of any rendering job to wet down dry, porous substrates so they do not suck moisture out of the fresh render too quickly. It is equally handy for flicking water onto render while sponging and finishing, and suits both professional renderers and DIY users working on exterior or interior walls.Features Purpose-made renderer's wetting brush for damping down surfaces before render is applied Natural palm fibre bristles that hold a generous amount of water Plastic textured handle for a secure grip with wet hands Built-in bucket hook to hang the brush on the lip of your bucket Ideal companion for Dunlop render products CareRinse the bristles thoroughly in clean water after each use so no render slurry hardens in the fibres. Shake out excess water, hang the brush by its hook or lay it flat to dry, and store it out of direct sun to keep the natural bristles in good condition.
$38.11
The Dunlop Poly Float is a trade-quality polyurethane float made for finishing renders and screeds to a superior, professional standard. The dense poly face works the surface firmly and evenly, closing pores and levelling small imperfections so walls and screeded floors come up with a consistent texture. It is a straightforward, reliable tool that earns a permanent spot in any renderer's kit.Where to use itUse the poly float once render or screed has been applied and has started to take up, moving it in steady circular or sweeping strokes to flatten and refine the surface. It is equally at home on rendered exterior walls, internal patching work, and sand-cement floor screeds, making it a versatile choice for tradespeople and confident DIYers alike.Features Quality trade poly float for finishing renders and screeds Delivers a superior, professional-standard finish Firm polyurethane face that levels and closes the surface evenly Comfortable to use over large areas Suits both wall render and floor screed applications CareRinse the float clean as soon as you finish a section, since render and screed set hard on the poly face and are difficult to remove later. Dry the tool before storing it, keep it flat, and inspect the face for gouges that could mark future work.
$25.36
The Dunlop Renderers Hawk is a trade-quality hand board built for carrying and working render on site. Its plate is made from strong, grooved aluminium that holds a load of render securely at your side, so you can move material from the mixing bucket to the wall smoothly and keep application flowing without constant trips back and forth. A flush plate and the unique ErgoGrip handle keep the tool balanced and comfortable in the hand through long stretches of work.Where to use itUse the hawk on any rendering project, indoors or out, wherever render, patching compounds or similar mortars need to be carried and fed onto a trowel. It suits professional renderers and plasterers as well as home renovators tackling their own walls, and pairs naturally with Dunlop acrylic and fine coat renders.Features Strong, grooved aluminium plate that supports the render during application Flush plate design for clean loading and scraping Unique ErgoGrip handle for comfort and control Ideal for render projects of all sizes Genuine trade-quality Dunlop tool CareScrape off excess render and rinse the plate with clean water before the material sets, as cured render is difficult to remove from the grooves. Wipe the tool dry, check the handle fixing occasionally, and store it flat in a dry place so the aluminium plate stays true.
$62.78
The Dunlop Concrete Edger is a quality stainless steel trade tool designed to put clean, rounded edges on fresh concrete for a truly professional finish. Running the edger along the perimeter of a pour compacts and shapes the edge, reducing the risk of chipping once the formwork comes off and giving slabs, paths and steps a neat, finished look.Where to use itUse the edger on any freshly placed concrete where a formed edge is exposed, such as driveways, footpaths, patios, garage slabs and step treads. Work it along the junction between the concrete and the formwork while the surface is still workable to create a smooth, uniform radius along every edge.Features Hard-wearing stainless steel construction Purpose-made for edging concrete Creates a rounded, chip-resistant edge Delivers a consistent, professional finish Comfortable and easy to control CareRinse the edger clean immediately after use so cement paste cannot cure on the working faces, paying attention to the curved lip. Dry the tool before putting it away and store it where the radius edge will not get knocked or bent, keeping your edges crisp job after job.
$35.53
The Dunlop Concrete Float is a hard-wearing, sides-up float made to deliver a smooth, professional finish on fresh concrete. The blade is manufactured from high-strength stainless steel with exposed rivets that show off the tool's robust construction, while the turned-up sides help the float glide over the surface without digging in. The ErgoGrip handle keeps the tool balanced and comfortable through long finishing sessions.Where to use itThis float is the go-to tool when finishing concrete slabs, paths, driveways and screeded surfaces. Use it after screeding to close up the surface, push down aggregate and bring fines to the top, leaving a flat, even face ready for edging, grooving or final trowelling.Features Hard-wearing sides-up float design High-strength stainless steel construction Exposed rivets for visible strength Comfortable ErgoGrip handle Ideal for concreting and screed finishing CareHose the float down as soon as you finish working, before any concrete hardens on the blade or in the rivets. Dry it off after cleaning and store it flat where the sole cannot get dented or scratched, so it continues to leave a flawless surface on the next pour.
$55.79
The Dunlop External Corner Tool is a stainless steel finishing tool that takes the guesswork out of shaping external corners on rendered surfaces. Its pre-formed angle lets you run a straight, uniform corner in one pass, delivering the kind of sharp, consistent line that is very hard to achieve freehand with a standard trowel. It is a simple tool that makes a visible difference to the quality of a rendering job.Where to use itUse it wherever two rendered walls meet at an outside corner, such as building facades, garden walls, window reveals, pillars and parapets. After applying render to both faces, draw the corner tool down the arris to true up and smooth the junction for a professional result on exterior and interior render work.Features Purpose-made finishing tool for external corners Durable stainless steel construction Produces straight, uniform corner lines Ideal for render projects of all sizes Simple to use for pros and DIYers alike CareWash render off the tool straight after use, before it hardens in the folded angle. Dry the stainless steel thoroughly and store the tool so the formed corner cannot be bent or crushed, as a true angle is what gives you clean corners next time.
$26.01
The Dunlop Gauging Trowel is a versatile hand tool that earns its place in any renderer's or concreter's kit. Built with a high-quality carbon steel blade and finished with Dunlop's distinctive ErgoGrip handle, it offers the strength to mix and scoop cement-based products and the comfort to keep working all day. Its rounded-nose blade shape makes it easy to gauge, transfer and apply material exactly where it is needed.Where to use itUse it across a wide range of jobs, including mixing and placing concrete, screeds, renders and mortar, patching masonry, and roof pointing work. It is just as handy for scooping product from the bucket as it is for working material into tight spots that larger trowels cannot reach, indoors or out.Features High-strength carbon steel blade Unique ErgoGrip handle for added comfort True multipurpose design Suited to concrete, screeds, renders, masonry and roof pointing Compact shape for detail and gauging work CareRinse render, mortar or concrete off the blade before it sets, using a stiff brush for stubborn residue. Because carbon steel can rust, dry the tool thoroughly after washing and consider a light wipe of oil on the blade before storing it in a dry toolbox.
$26.26
Dunlop Coloured Render Texture Coat is a premixed, coloured acrylic texture coat that delivers a durable, contemporary decorative finish straight from the pail. Tinted in a range of popular Colorbond® colours, it lets you match rendered walls to roofing, gutters and trims without painting afterwards. The easy trowel-and-float formulation applies like a render but finishes like a designer coating, and its protective acrylic film shrugs off weather for a long-lasting, low-maintenance facade.Where to use itFor indoor and outdoor decorative finishing over brick, blockwork, concrete, blueboard and compressed fibre cement sheet — typically as the final coat over a levelled base render such as Dunlop Multipurpose Acrylic Render or Flexible Fine Coat Render. Choose from Surfmist, Dune, Woodland Grey and Monument to complement your colour scheme.How to useEnsure the base surface is clean, dry, sound and uniform; make good any defects with Dunlop Render Joint & Patch first. Stir the pail thoroughly to an even colour, then apply with a steel trowel to a thin, consistent film of around 1mm. While still workable, rub up with a plastic float in a circular motion to develop the characteristic texture. Work wall sections wet-edge to wet-edge to avoid joins, and use pails from the same batch on a single elevation. Tools clean up with water. A 12.5L pail covers up to 10m² at 1mm thickness.Important notesColour consistency is best when complete walls are finished in one session from mixed batches. Avoid application in rain, extreme heat or onto damp substrates; drying slows in cold, humid conditions.Specifications Size 12.5L pail Colours Surfmist, Dune, Woodland Grey, Monument (Colorbond®) Coverage Up to 10m² at 1mm per pail Finish Coloured acrylic texture coat SafetyWater-based acrylic coating. Wear gloves and eye protection, avoid skin and eye contact and wash off with water while wet. Keep sealed and away from children, and consult the Safety Data Sheet before use.
$135.40
Dunlop Multipurpose Acrylic Render is a high-performance, polymer-modified render engineered for superior trowelability and a no-sag, no-crack result even at higher builds. It can be applied from 2mm right up to 10mm in thickness without slumping, which makes it equally at home as a levelling base coat over rough masonry or as a straightening coat before a fine or textured finish. One bag covers the jobs a standard sand-and-cement mix struggles with, while remaining easy to rule off and float.Where to use itFor indoor and outdoor rendering over AAC panels and blocks, brickwork, concrete blockwork and concrete walls. Use it to render new masonry, level uneven walls, and build out hollows before finishing with Dunlop Ready-to-Go Render, Fine Coat Render or Coloured Render Texture Coat.How to usePrepare a clean, sound, dust-free substrate and dampen very porous masonry or apply the recommended primer. Mix the powder with clean water to a smooth, workable consistency, then apply with a steel trowel at 2-10mm. Rule off with a straight edge, allow to firm, then float or sponge to the desired surface. The Dunlop Gauging Trowel helps achieve a professional finish. As a guide, 20kg covers approximately 6.5m² at 2mm, 2.6m² at 5mm or 1.3m² at 10mm thickness.Important notesDo not exceed 10mm per coat — build very deep sections in multiple passes. Avoid application in direct hot sun, high wind or onto frozen or saturated substrates, and protect fresh render from rapid drying. Allow to cure fully before over-coating or painting.Specifications Size 20kg bag Colour Light Grey Coverage 6.5m² at 2mm, 2.6m² at 5mm, 1.3m² at 10mm per bag Application thickness 2-10mm SafetyContains cement — wet render is alkaline and can irritate or burn skin and eyes. Wear gloves, eye protection and a dust mask when mixing, avoid breathing dust and wash skin promptly after contact. Read the Safety Data Sheet before use.
$23.55
Dunlop Flexible Fine Coat Render is a high-performance, fibre-reinforced, polymer-modified render that produces a fine, closed finish with superior adhesion and flexibility. The embedded fibres and flexible polymers allow the render to tolerate the minor movement common to sheeted and composite walls, dramatically reducing the risk of surface cracking. It can be applied by standard trowelling methods or by spray, and a variety of decorative finishes can be achieved depending on how it is floated or sponged.Where to use itSuitable for indoor and outdoor use over an unusually wide range of substrates: FC sheet and blueboard, concrete and blockwork, sound painted surfaces (alkali stable and water resistant), existing render, AAC panels and blocks, and EPS foam panels. It is the go-to finishing render where substrate movement or mixed materials would defeat a rigid render.How to useEnsure the substrate is clean, sound and free of dust, oil and loose coatings; prime where the system requires. Mix the powder with clean water to a smooth, lump-free consistency and apply by steel trowel or spray at 2-10mm thickness. Rule off, allow the render to firm, then float, sponge or texture to the desired finish. A 20kg bag covers approximately 6.5m² at 2mm or 2.6m² at 5mm thickness. Clean tools with water before the render sets.Important notesStay within the 2-10mm application range per coat. Avoid rendering in extreme heat, wind or imminent rain, and protect the fresh surface from rapid drying. Painted substrates must be firmly bonded, alkali-stable and water resistant.Specifications Size 20kg bag Colour Grey Coverage 6.5m² at 2mm or 2.6m² at 5mm per bag Application thickness 2-10mm Reinforcement Fibre-reinforced, polymer modified SafetyCement-based powder — the wet mix is alkaline and dust can irritate airways. Wear gloves, safety glasses and a P2 dust mask when mixing, work in ventilation and wash skin after contact. Refer to the Safety Data Sheet before use.
$39.21
Dunlop Render Joint & Patch is a high-performance, two-in-one compound for rendering projects: it joints fibre cement sheet and blueboard before render is applied, and it patches cracks and holes in existing rendered surfaces up to 5mm deep or wide. Supplied premixed in a light grey colour that blends into most render systems, it takes the fuss out of preparation work — one pail handles both the sheet joints and the surface defects before your finishing coat goes on. The 4L size is perfect for repairs and smaller rendering jobs.Where to use itOn interior and exterior walls. As a jointing compound, use it over blueboard and fibre cement sheet prior to rendering. As a patching compound, use it over sound existing render to fill hairline cracks, chips, divots and small holes before re-coating or painting.How to useSurfaces must be clean, dry, sound and free of dust, loose render and contaminants. Stir the pail, then trowel the compound firmly over sheet joints (embedding tape where the sheet system requires) or press it into cracks and holes, striking off flush with the surrounding surface. Feather edges smooth with a trowel — the Dunlop Gauging Trowel gives a professional finish. Allow to dry fully before applying render, texture or paint, and wash tools in water straight after use.Important notesMaximum patch depth or width is 5mm — build deeper repairs in stages or use a repair mortar. Drying time lengthens in cold or humid conditions. Not intended for structural crack repair or designed movement joints.Specifications Size 4L pail Colour Light Grey Patch capacity Cracks and holes up to 5mm (depth or width) Location Indoor and outdoor walls SafetyWater-based compound — wear gloves and safety glasses, avoid skin and eye contact and wash off with water. Keep the pail sealed and out of reach of children, and read the Safety Data Sheet before use.
$65.35
Dunlop Render Joint & Patch in the 10L trade pail is a high-performance combination product that covers two essential preparation steps in one: jointing fibre cement sheet and blueboard ahead of rendering, and patching cracks and holes up to 5mm in existing rendered walls. Premixed to a smooth, light grey consistency, it goes straight from pail to trowel with no mixing, keeping preparation fast and consistent across large jobs. The 10L size is the economical choice for renderers and builders working across full elevations or multiple rooms.Where to use itIndoors and outdoors on walls. Use as a jointing compound over blueboard and fibre cement sheeting before render systems are applied, and as a patching compound over sound existing render to make good cracks, holes and surface defects up to 5mm deep or wide before re-rendering, texture coating or painting.How to usePrepare a clean, dry, sound surface free of dust, loose material and contaminants. Trowel the compound firmly across sheet joints, embedding jointing tape where required by the sheet manufacturer, and feather the edges flush. For patching, press the compound into the defect, strike off level and smooth the surface — the Dunlop Gauging Trowel helps achieve a professional finish. Allow to dry completely before over-coating, and clean tools with water while the product is still wet.Important notesRepairs deeper or wider than 5mm need staged applications or a dedicated repair mortar. Cold, damp or humid weather extends drying times. Do not use across designed movement joints — finish those with a flexible sealant.Specifications Size 10L pail Colour Light Grey Patch capacity Cracks and holes up to 5mm (depth or width) Location Indoor and outdoor walls SafetyWater-based product. Wear gloves and eye protection during use, avoid prolonged skin contact and wash exposed skin with water. Store sealed, keep away from children and consult the Safety Data Sheet before application.
$117.64
Dunlop Flexible FC Jointing Compound in the 8kg trade pail is a premixed, flexible jointing compound for fibre cement sheet and blueboard, formulated to prepare sheet joints before decorative coatings, texture finishes or render go on. Ready to use straight from the container, it removes mixing from the workflow entirely and keeps a consistent, workable body from the first trowel-load to the last. Its flexible acrylic formulation moves with the substrate to resist joint cracking, while strong adhesion keys the compound firmly to the sheet surface.Where to use itFor jointing fibre cement sheeting and blueboard on interior and exterior walls — cladding, facades, garage conversions, extensions and commercial sheeted walls — prior to painting, texture coating or rendering. The larger pail suits whole-wall and multi-room jobs where a 3kg pack would run short.How to useCheck that sheets are rigidly fixed and joints are clean, dry and dust-free. Apply the compound over each joint with a trowel or broad knife, embedding jointing tape where the sheet manufacturer requires it, then finish with a band approximately 75mm wide and 1mm thick, feathered smooth at the edges. Allow to dry completely before over-coating. Wet compound cleans off tools with water. Coverage is approximately 7 lineal metres per kilogram at 75mm width and 1mm thickness, so an 8kg pail joints in the order of 55 lineal metres.Important notesDesigned movement joints should be finished with a flexible sealant rather than jointing compound. Drying slows in cold or humid weather. Keep the lid sealed between uses and do not thin the product with water.Specifications Size 8kg pail Colour Grey Coverage Approx. 7Lm per kg (75mm wide at 1mm thick) Location Indoor and outdoor walls SafetyWater-based acrylic product. Wear gloves and eye protection during application, avoid prolonged skin contact and wash with water after use. Store sealed in a cool place away from children and refer to the Safety Data Sheet before starting.
$92.06
Dunlop Ready-to-Go Render is a premixed white render supplied in a resealable pail, ready to trowel straight onto the wall with no mixing, no dust and no wasted powder. Its easy trowel-and-float formulation makes it one of the most approachable renders for first-time renderers, while still giving experienced applicators a smooth, workable body. Applied at 1-5mm, it delivers a clean, uniform finish over a wide variety of common wall surfaces inside and out.Where to use itSuitable for indoor and outdoor projects over AAC panels and blocks, blueboard, brickwork, concrete walls and sound painted surfaces. Ideal for feature walls, fence walls, garden walls, patching over dated finishes and giving tired masonry a fresh, rendered look.How to useMake sure the surface is clean, sound and free of dust, oil and loose or flaking material; prime porous or painted surfaces as recommended. Stir the pail, then apply the render with a steel trowel to a thickness of 1-5mm, working in manageable sections. Rule off and finish with a float or sponge float once the render has firmed — the Dunlop Sponge Float gives a superior finish. For a higher build over uneven walls, first apply Dunlop Multipurpose Acrylic Render as a base coat and use Ready-to-Go Render as the finishing coat. Tools wash up in water.Important notesKeep within the 1-5mm application range per coat. Avoid rendering in direct hot sun, strong wind or when rain is expected; cold and humid conditions extend drying times. Reseal the pail to keep unused render workable.Specifications Size 16kg pail Colour White Coverage Approx. 6m² at 1mm or 2m² at 3mm per 16kg Application thickness 1-5mm SafetyWater-based premixed render. Wear gloves and safety glasses, avoid skin and eye contact, and wash with water after use. Keep out of reach of children and refer to the Safety Data Sheet for detailed handling information.
$120.29
Dunlop Ardit Construction Grout in the full-size 20kg bag is a high-strength, multipurpose construction grout that mixes to either a non-slump paste or a flowable consistency to suit a wide range of projects. Its extended working time allows extra minutes for accurate positioning before set, and the non-shrink formulation locks components firmly in place. The grout achieves approximately 45MPa after 7 days and around 65MPa at 28 days, and carries a 10 year guarantee, making it a dependable choice for structural packing and grouting work.Where to use itDesigned for indoor and outdoor use in general construction grouting and machine grouting applications: grouting under machine bases, baseplates and stanchions, filling voids, pockets and core holes in concrete, bedding structural members, and anchoring bolts, rails and fixings into concrete and masonry. Application thickness ranges from 5mm to 100mm.How to useEnsure surfaces are structurally sound, clean and free of dust, oil and laitance, and pre-dampen porous substrates. Mix with clean water to the consistency required — a stiff non-slump mix for hand packing and trowelling, or a flowable mix for pouring into formwork and confined spaces. Place within the working time and compact well to eliminate air voids. A 20kg bag yields approximately 11.2L as a non-slump mix or 12.0L as a flowable mix.Important notesKeep within the 5-100mm application range. Avoid adding excess water, which lowers strength and increases shrinkage risk. Low temperatures slow strength development; protect fresh grout from rapid drying in hot or windy conditions.Specifications Size 20kg bag Colour Grey Yield 11.2L per 20kg (non-slump), 12.0L per 20kg (flowable) Compressive strength Approx. 45MPa (7 days), 65MPa (28 days) Application thickness 5-100mm SafetyCement-based product — wet grout is alkaline and may cause skin and eye irritation. Wear protective gloves, eye protection and a P2 dust mask when mixing. Avoid breathing dust. Consult the Safety Data Sheet before use and store in a dry place out of reach of children.
$42.23
Dunlop Tile Pointing is a flexible, premixed pointing compound that acts as a mechanical adhesive for hip and ridge roof tiles, exceeding the requirements of the relevant Australian Standards. Independently tested to achieve a C4 classification, it is approved for use in cyclonic regions, and its low-VOC formula resists mould and mildew while flexing with normal roof movement. Available in five roof-matched colours and backed by a 10 year guarantee, it is the straightforward way to re-point ridge capping and secure hip tiles without mixing mortar additives on site.Where to use itFor exterior roofing work only — pointing hip and ridge tiles over fresh or sound existing bedding on concrete and terracotta tiled roofs. Choose the colour that best matches your tiles: Slate Grey, Charred Ash, Jet Black, Sand or Terracotta.How to useBefore application, ensure all bedding material is in place and sound, and surfaces are clean and free of dust and loose mortar. Stir the pail contents, then apply the compound directly over the bedding with a gauging or pointing trowel, working it firmly against both the ridge tile and the roof tile surfaces to a thickness of roughly 3-5mm. Tool off to a neat finish. Wash tools in warm water immediately after use. Coverage is approximately 2 lineal metres per litre, so a 10L pail points roughly 20-22 lineal metres of ridging depending on technique.Important notesNever add water to Tile Pointing. Cold (below 10°C), damp or humid conditions lengthen drying time, while hot, windy weather can significantly shorten working time — avoid application if rain is imminent.Specifications Size 10L pail Colours Slate Grey, Charred Ash, Jet Black, Sand, Terracotta Coverage Approx. 2 lineal metres per litre (20-22Lm per pail) Application thickness 3-5mm Classification C4 - cyclonic region approved SafetyLow VOC, water-based compound. Wear gloves and eye protection, and take appropriate precautions when working at heights on roofs. Wash skin with warm water after contact and refer to the Safety Data Sheet before use.
$61.05
Dunlop Flexible FC Jointing Compound is a premixed, flexible compound for jointing fibre cement sheet and blueboard before decorative coatings are applied. Because it comes ready to use straight from the pail, there is no on-site mixing, no powder mess and no guesswork about water ratios — simply open, stir and trowel. The flexible formulation accommodates the minor movement typical of sheeted walls, while its excellent adhesion delivers a reliable, crack-resistant joint. The compact 3kg pail is ideal for smaller sheeting jobs and repairs.Where to use itUse on interior and exterior walls to finish joints between fibre cement sheets and blueboard prior to painting, texture coating or rendering. It is the recommended first step in preparing sheeted facades, extensions and infill panels for a decorative finish.How to useEnsure sheets are securely fixed and joints are clean, dry and free of dust. Where the sheet system requires it, embed jointing tape in a first application of compound. Apply the compound over the joint with a trowel or broad knife in a band roughly 75mm wide and about 1mm thick, feathering the edges smooth into the sheet face. Allow to dry fully before over-coating with paint, texture or render. Tools clean up with water while the compound is wet. Coverage is approximately 7 lineal metres per kilogram at a 75mm width and 1mm thickness — around 21 lineal metres from this 3kg pail.Important notesNot a structural adhesive or gap filler for moving joints wider than the system allows — use a flexible sealant at designed movement joints. Cold or humid conditions extend drying time. Reseal the pail after use to keep the remainder workable.Specifications Size 3kg pail Colour Grey Coverage Approx. 7Lm per kg (75mm wide at 1mm thick) Location Indoor and outdoor walls SafetyWater-based acrylic compound. Wear gloves and safety glasses, avoid skin and eye contact, and keep away from children. Wash hands and tools with water after use, and consult the Safety Data Sheet for full handling advice.
$42.06
Dunlop General Purpose Construction Grout is an economical, high-strength cementitious grout that can be mixed to a dry pack, plastic or flowable state, giving one bag remarkable versatility across construction and repair tasks. The shrinkage-compensated formulation holds its volume as it cures, and strength development is impressive for a general purpose product — approximately 70MPa at 7 days and up to 85MPa at 28 days when mixed as a dry pack with 12% water.Where to use itSuited to indoor and outdoor projects wherever a dependable, high-strength grout is needed: packing under baseplates and machinery, filling voids, holes and pockets in concrete, bedding posts and bollards, grouting anchor bolts and starter bars, and general making-good around concrete and masonry. Application thickness ranges from 10mm up to 100mm.How to useStart with a clean, sound substrate free of dust, oil and loose particles, and dampen absorbent surfaces before grouting. Add clean water to achieve the consistency the job requires — dry pack for ramming into confined spaces, plastic for trowel placement, or flowable for pouring. Compact or rod the grout to remove entrapped air and finish with a steel trowel. A 20kg bag yields approximately 9.5L as dry pack, 10.3L at plastic consistency or 10.9L as a flowable mix. Varying the water ratio changes both workability and final strength.Important notesHigher water contents make placement easier but reduce ultimate strength — use the minimum water needed for workability. Maintain the 10-100mm thickness range and protect fresh grout from freezing and from rapid drying.Specifications Size 20kg bag Colour Grey Yield 9.5-10.9L per 20kg depending on consistency Compressive strength Approx. 70MPa (7 days), 85MPa (28 days) as dry pack Application thickness 10-100mm SafetyContains portland cement — wet product is alkaline and can burn skin and eyes on prolonged contact. Wear gloves, safety glasses and a dust mask when mixing, and avoid breathing dust. Read the Safety Data Sheet before use.
$26.30
Dunlop Matte Silicone is a flexible acetic-cure sealant with an elegant matte finish, made for modern tiles and grouts where a shiny silicone bead would look out of place. Available in four designer colours — White, Grey, Silver Grey and Anthracite — it lets the sealant line sit quietly against matte porcelain, stone-look tiles and contemporary grout colours while still delivering strong adhesion and dependable waterproofing.Where to use itIdeal for wall and floor junctions, tiled surfaces, benchtops, bath edges, cupboards, splashbacks and movement joints up to 30mm wide. It is mould resistant, UV and weather resistant, and suitable for both indoor and outdoor use, including wet areas. It bonds well to ceramic tiles, glass, enamel, anodised aluminium, granite, porcelain and sanitary acrylics.How to usePrepare joints so they are clean, dry and free of dust, grease and old sealant residue. Cut the cartridge tip and nozzle to match the joint width, fit the cartridge in a caulking gun and run a smooth, continuous bead along the joint. Tool it off promptly before a skin forms, remove masking tape straight away, and let the silicone cure fully before use in wet areas.Important notesBeing an acetic-cure silicone, it must not be used under waterproofing membranes or with mirrors, as the cure can damage those surfaces — use a neutral-cure silicone there instead. Maximum joint size is 30mm wide by 15mm deep.Specifications Size 310ml cartridge Max joint width 30mm wide x 15mm deep Cure type Acetic cure silicone, matte finish SafetyEnsure good ventilation during application and avoid skin and eye contact with uncured sealant. Keep away from children and consult the Safety Data Sheet available from Dunlop Trade before starting work.
$30.99
Dunlop Ardit Construction Grout is a high-strength, cement-based grout that can be mixed to either a stiff, paste-like consistency or a free-flowing pour, making it a genuine all-rounder for construction and repair work. Formulated with Ardit Technology and an extended working time, it gives you more room to position components accurately before the mix begins to set. This non-shrink formulation reaches approximately 45MPa after 7 days and around 65MPa at 28 days, and it is backed by a 10 year guarantee. The handy 5kg bag suits smaller jobs and repairs without the waste of a full-size bag.Where to use itSuitable for indoor and outdoor projects wherever a high-strength, non-shrink grout is required — general construction grouting, machine and equipment base grouting, filling voids and pockets in concrete, bedding and packing under plates, and anchoring bolts, rails and posts. It performs over concrete and masonry substrates at application thicknesses from 5mm up to 100mm.How to usePrepare a sound, clean substrate free of dust, oil and loose material, and pre-dampen absorbent surfaces. Mix the powder with clean water to the consistency the job calls for — non-slump paste for vertical packing or a flowable mix for pouring into forms and voids. Place the grout within its working time, compacting or rodding to remove air pockets, then finish with a trowel. As a guide, a 20kg quantity yields roughly 11.2L as a non-slump mix or 12.0L as a flowable mix, so expect around a quarter of that from this 5kg bag.Important notesApply between 5mm and 100mm thickness. Do not over-water the mix, as excess water reduces final strength. Cold or damp conditions extend curing times; hot, windy conditions shorten working time.Specifications Size 5kg bag Colour Grey Yield Approx. 2.8-3.0L per 5kg depending on consistency Compressive strength Approx. 45MPa (7 days), 65MPa (28 days) Application thickness 5-100mm SafetyContains cement — the wet mix is alkaline and can irritate skin and eyes. Wear gloves, safety glasses and a dust mask when handling the dry powder, work in a ventilated area and wash hands after use. Refer to the Safety Data Sheet before use and keep out of reach of children.
$23.73
Dunlop Timber Joint Sealant is a flexible sealant developed specifically for wall and floor joints around timber substrates such as laminate, parquet and solid wooden floorboards. It fills expansion gaps, skirting junctions and threshold joints in a timber-toned finish, stopping water and debris from working their way into the joint while still allowing the natural movement of the floor. Once cured it can be sanded and painted over, making it easy to blend into the surrounding surface, and it is available in two distinctive wood-look colours: Beech and Silver Grey Oak.Where to use itUse it on wall and floor joints where timber, laminate or parquet meets another surface — around floor perimeters, stair nosings, skirtings and door thresholds — indoors and outdoors. It also adheres well to ceramic tiles, glass, enamel, anodised aluminium, granite, porcelain and sanitary acrylics, so it handles transitions between timber and tiled areas neatly.How to useEnsure joints are clean, dry and free from dust, oils and loose material. Cut the cartridge tip and nozzle to suit the gap, load it into a caulking gun and apply an even, continuous bead. Smooth the bead with a tooling implement before it skins over, and remove any masking tape immediately. Allow the sealant to cure fully before sanding or painting over the joint.Important notesSuitable for joints up to 30mm wide and 15mm deep. Unlike a silicone, this sealant accepts sanding and paint once cured, which makes it the better choice where the joint needs to disappear into a finished floor or wall.Specifications Size 310ml cartridge Max joint width 30mm wide x 15mm deep Cure type Acrylic, sandable and paintable when cured SafetyApply in a ventilated space, avoid contact with skin and eyes, wash hands after use and keep the product away from children. Review the Safety Data Sheet on the Dunlop Trade website before application.
$30.73
Dunlop Coloured Silicone is a flexible acetic-cure sealant designed to finish and protect the joints that grout alone cannot handle. Because the colour range is matched to the Dunlop Coloured Grout palette, you can seal wall junctions, bath edges and benchtop joints in a shade that blends seamlessly with your tiling for a clean, coordinated finish. It applies easily from a standard 310ml cartridge, bonds strongly, stays waterproof and is backed by a 10 year guarantee.Where to use itUse it on wall and floor junctions, tiled surfaces and benchtops, bath edges, cupboards, splashbacks and movement joints, both indoors and outdoors. It is waterproof and suitable for use in showers, and offers strong adhesion to ceramic tiles, glass, enamel, anodised aluminium, granite, porcelain and sanitary acrylics.How to useMake sure joints are clean, dry and free of dust, old sealant and excess adhesive. Cut the cartridge tip and nozzle to suit the joint width, load into a caulking gun and apply a continuous bead into the joint. Tool the bead smooth within a few minutes of application, before a skin forms, and remove any masking tape immediately. Apply at temperatures between 5°C and 40°C and allow the silicone to cure fully before exposing it to water.Important notesThis is an acetic-cure silicone, so do not use it under waterproofing membranes or against mirror backings, as it can damage those surfaces — choose a neutral-cure silicone for such jobs. Suits joints up to 30mm wide and 15mm deep.Specifications Size 310ml cartridge Max joint width 30mm wide x 15mm deep Cure type Acetic cure silicone SafetyUse in a well-ventilated area and avoid contact with skin and eyes while uncured. Keep out of reach of children and refer to the Safety Data Sheet on the Dunlop Trade website before use.
$29.25 - $31.00
Dunlop Grout Paint is the quick, budget-friendly way to make a tiled area look new again without raking out old or discoloured grout. The acrylic formula paints straight over existing grout lines with the built-in brush applicator, offering excellent opacity that covers even dark colours in a coat or two. Clean-up is easy, and a single 250ml bottle refreshes a surprisingly large area.Where to use itUse it over old or discoloured cement grout on indoor walls and floors and on outdoor walls. It is perfect for freshening bathrooms, kitchen splashbacks and laundry tiling, or for switching grout colour - brightening joints with Ultrawhite or going darker with Slate Grey or Jet Black for a modern contrast.How to useClean the grout thoroughly (Dunlop Tile & Grout Cleaner works well) and let it dry. Shake the bottle, then brush the paint along the grout line with the applicator, overlapping slightly onto the tile edge. Once touch dry - about 15-20 minutes at 23°C - wipe the overpainted edges off the tile faces with a damp cloth. Allow 2 hours' cure after cleaning, then polish the area with a soft cloth. The paint is fully set after 24 hours, after which showers can be exposed to water.Important notesNot suitable for swimming pools or external floors. Expect faster wear in areas with regular foot traffic or frequent exposure to water, soaps and chemicals such as shower floors. Coverage varies enormously with joint width and tile size - from about 1m² on small mosaic tiles with wide joints up to 200m² on large-format tiles with fine joints.Specifications Use on Old or discoloured grout joints Coverage guide Approx. 60m² per 250ml for 330 x 330mm tiles at 3mm joints Tile types Grout joints between most glazed ceramic and porcelain tiles Location Indoor walls and floors, outdoor walls SafetyAvoid contact with eyes and prolonged skin contact; wear gloves if desired and wash hands after use. Use with adequate ventilation, keep out of reach of children and refer to the Safety Data Sheet.
$18.71
Dunlop Flexible Coloured Grout in the trade-size 15kg bag is built for big tiling jobs - whole houses, commercial floors and multi-room renovations. It is the same flexible, smooth-finish formula tilers rely on, with a stronger colour system for rich, even grout lines and Grout Shield anti-mould and anti-bacteria technology that resists mould and bacteria growth in wet areas. The grout works easily, ensures flush joints and leaves no pin holes.Where to use itSuitable for walls and floors, indoors and outdoors, over ceramic, porcelain, marble, granite and mosaic tiles. With a working range of 1mm to 8mm joints it handles fine wall tiling through to wide-format floor tiles, and the grey tones (Misty Grey and Slate Grey) are popular choices for high-traffic floors where joints need to hide everyday wear.How to usePrepare clean, dry joints raked free of adhesive. Mix with clean water to a smooth paste - or with Dunlop Primer & Additive to boost colour, flexibility, adhesion and stain resistance. Apply diagonally with a rubber grout float, pack joints full, remove excess, then sponge the tiles clean once the grout firms and polish off haze. Initial set is around 24 hours, showers can be wet after 3 days, and full cure is reached after 7 days.Important notesInclude about 15% wastage in quantity estimates. Mix batches with consistent water content to avoid colour variation across large floors.Specifications Joint width 1 - 8mm Coverage guide Approx. 0.55kg/m² for 200 x 200 x 8mm tiles at 3mm joints Tile types Ceramic, porcelain, marble, granite, mosaics Location Walls and floors, indoor and outdoor SafetyCement-based product - alkaline when wet and may irritate skin and eyes. Wear gloves and eye protection, avoid inhaling dust when emptying and mixing the bag, and wash after use. Keep out of reach of children; see the Safety Data Sheet.
$79.95
Dunlop Easy Clean Epoxy Grout is a high-performance, durable epoxy grout with superior stain resistance that stands up to most household chemicals. Unlike traditional epoxies it is genuinely easy to use and clean during application, and just as easy to maintain afterwards. It also contains Grout Shield, a powerful mould inhibitor that resists the growth of mould and bacteria, keeping joints looking better for longer.Where to use itIdeal for areas subject to high wear and for spaces where strict hygiene matters - kitchens, bathrooms, laundries and swimming pools. Use it indoors and outdoors on walls and floors with ceramic, porcelain, vitrified tiles, mosaics and non-moisture-sensitive natural stone. It fills joints from 1.5mm up to 15mm wide.How to useThe kit comes in three parts: Part A resin, Part B hardener and Part C coloured filler, mixed at approximately 2 : 1 : 5-7 by volume. Mix only what you can use within the working time, work the grout firmly into clean, dry joints with an epoxy float, then emulsify and clean the surface promptly with a lightly damp sponge before the epoxy sets. Finish by polishing the tiles once dry. Mix part-kits accurately if you split the kit across sessions.Important notesEpoxy grout sets chemically, so cleaning off residue promptly is essential - hardened epoxy is very difficult to remove from tile faces. Coverage varies with tile size and joint dimensions; as a guide a kit does approximately 8m² of 200 x 200 x 8mm tiles at 3mm joints.Specifications Joint width 1.5 - 15mm Coverage guide Approx. 8m² per kit for 200 x 200 x 8mm tiles at 3mm joints Tile types Ceramic, porcelain, vitrified, mosaics, non-moisture-sensitive stone Location Walls and floors, indoor and outdoor SafetyEpoxy resins and hardeners can cause skin and eye irritation and sensitisation. Wear gloves and eye protection, ensure good ventilation, avoid skin contact with uncured components, and wash immediately after any contact. Keep out of reach of children and read the Part A, Part B and colour pack Safety Data Sheets before use.
$114.00
Dunlop Ultra-White Grout is a non-sanded, flexible cement-based grout that delivers a super smooth, brilliantly white finish between wall and floor tiles. Formulated with Grout Shield anti-mould and anti-bacteria technology, it actively resists the growth of mould and bacteria so joints stay looking cleaner for longer. The cured grout is water repellent, resists dirt pick-up and is easy to wipe clean, making it a favourite for bright, fresh bathrooms and kitchens.Where to use itUse Ultra-White Grout on walls and floors, indoors and outdoors. It is suited to ceramic, porcelain, marble, granite and mosaic tiles, and is designed for narrow tile joints between 1mm and 4mm wide where a fine, non-sanded finish is wanted.How to useEnsure joints are clean, dry and free of dust or adhesive residue. Mix the powder with clean water to a smooth, lump-free paste, then work the grout firmly into the joints on the diagonal using a rubber grout float or squeegee. Remove the excess as you go, then clean the tile faces with a lightly damp sponge once the grout has firmed. Polish off any remaining haze with a soft, dry cloth. Allow the grout to cure fully before exposing wet areas such as showers to water.Important notesCoverage varies with tile size, joint width and joint depth, and a wastage allowance of around 15% should be included when estimating. For wide joints over 4mm choose a sanded or wide-joint grout instead. Pair with Dunlop Grout Sealer for extra stain protection.Specifications Joint width 1 - 4mm Coverage guide Approx. 6.7m² for 300 x 300 x 5mm tiles at 3mm joints (incl. 15% wastage) Tile types Ceramic, porcelain, marble, granite, mosaics Location Walls and floors, indoor and outdoor SafetyCement-based product - the wet mix is alkaline and may irritate skin and eyes. Wear gloves and eye protection, avoid breathing dust when mixing, and wash hands after use. Keep out of reach of children and refer to the Safety Data Sheet before use.
$15.23
Dunlop Ultra-White Grout in the 5kg pack is a non-sanded, flexible grout that produces a super smooth, super white finish across larger tiling jobs. It contains Grout Shield anti-mould and anti-bacteria technology to resist mould and bacteria growth, and the cured joint is water repellent and easy to clean, helping white joints stay bright in busy bathrooms, laundries and kitchens.Where to use itSuitable for tile joints on walls and floors, indoors and outdoors. Use it with ceramic, porcelain, marble, granite and mosaic tiles wherever joints are between 1mm and 4mm wide. The 5kg pack size suits full bathroom renovations, splashback runs and floor areas where a 1.5kg pack would run short.How to usePrepare joints so they are clean, dry and raked free of adhesive. Mix the powder with clean water to a smooth, creamy paste and let it stand briefly before remixing. Apply diagonally across the joints with a rubber grout float, pressing the grout in fully and striking off the excess. Once firm, sponge the tile faces clean with minimal water, then buff away the haze with a dry cloth. Keep showers dry until the grout has cured.Important notesEstimate quantities from tile size, joint width and depth and allow roughly 15% extra for wastage. Not intended for joints wider than 4mm. Sealing with Dunlop Grout Sealer after curing improves long-term stain resistance.Specifications Joint width 1 - 4mm Coverage guide Approx. 13.3m² for 300 x 300 x 5mm tiles at 1.5mm joints (incl. 15% wastage) Tile types Ceramic, porcelain, marble, granite, mosaics Location Walls and floors, indoor and outdoor SafetyContains cement - wet grout is alkaline and can irritate skin and eyes. Wear gloves and safety glasses, avoid inhaling dust while mixing, and wash thoroughly after handling. Keep out of reach of children and consult the Safety Data Sheet.
$41.03
Dunlop Flexible Coloured Grout in the 5kg pack brings the same smooth finish and strong, consistent colour as the smaller pack, in a size suited to whole bathrooms, kitchens and floor areas. The formula is flexible and easy to work, ensures flush joints with no pin holes, and contains Grout Shield anti-mould and anti-bacteria technology that resists mould and bacteria growth so grout lines stay looking better for longer.Where to use itGrout walls and floors indoors and outdoors with ceramic, porcelain, marble, granite and mosaic tiles. Joints from 1mm to 8mm are covered, making it suitable for everything from fine mosaic work to wide-format floor tiles. In swimming pools, use White 200 mixed with Dunlop Primer & Additive.How to useRake joints clear of adhesive and ensure they are clean and dry. Mix the powder with clean water to a smooth, lump-free paste - or gauge with Dunlop Primer & Additive for enhanced colour, adhesion, abrasion and stain resistance. Work the grout diagonally into the joints with a rubber float, strike off the excess, then sponge clean once the grout firms and buff away residual haze. Initial set is about 24 hours, showers can get wet after 3 days, sealing is possible after 3 days and full cure takes 7 days.Important notesAllow roughly 15% wastage when estimating coverage from tile size, joint width and depth. Keep mixing water consistent between batches for uniform colour.Specifications Joint width 1 - 8mm Coverage guide Approx. 0.55kg/m² for 200 x 200 x 8mm tiles at 3mm joints Tile types Ceramic, porcelain, marble, granite, mosaics Location Walls and floors, indoor and outdoor SafetyContains cement - wet grout is alkaline and can irritate skin and eyes. Wear gloves and safety glasses, avoid dust when mixing, and wash hands after use. Keep out of reach of children and consult the Safety Data Sheet.
$41.03
Dunlop Universal Tile Adhesive is the do-almost-anything adhesive in the Dunlop Trade (ARDEX Australia) range – a high performance, multipurpose wall and floor tile adhesive with excellent workability and flexibility. Its non-slumping formula keeps wall tiles in position while its C2TES1 classification delivers extended open time, slip resistance and a deformable, high-strength bond for demanding applications.Where to use itOne of the most versatile adhesives available: suitable for indoor and outdoor walls and floors, and even swimming pools. It fixes ceramic, porcelain, natural stone (excluding moisture sensitive stone), mosaics and fully vitrified tiles over compressed fibre-cement sheet floors, concrete floors, fibre-cement sheet walls, Dunlop Undertile Waterproofing, plasterboard and render.How to useMix with clean water to a smooth, creamy consistency and allow to stand briefly before a final remix. Apply to a clean, dry, sound substrate with a 6mm notched trowel on walls or a 10mm notched trowel on floors. Press tiles firmly home with a twisting action, ensuring good adhesive transfer to the tile back – especially important outdoors and in pools where full contact is required. Grout after approximately 24 hours at 23°C and 50% relative humidity.Important notesNot suitable for moisture sensitive natural stone. For pool installations, allow the full recommended cure before filling. The product exceeds ISO 13007 requirements.Specifications Size 20kg bag Colour White Coverage 11m² per 20kg (6mm trowel); 7m² per 20kg (10mm trowel) Tile types Ceramic, porcelain, non-sensitive stone, mosaics, fully vitrified Substrates Concrete, compressed FC floors, FC walls, waterproofing, plasterboard, render Classification C2TES1 tile adhesive; exceeds ISO 13007 SafetyContains cement. Avoid breathing dust and avoid contact with skin and eyes. Wear protective gloves, clothing and eye protection while mixing and applying, and work in a well-ventilated area. Refer to the safety data sheet before use.
$59.68
Dunlop Artificial Grass Adhesive is a high strength, all-weather adhesive from Dunlop Trade (ARDEX Australia), purpose-made for laying artificial grass, outdoor carpet and marine carpet. With excellent water and heat resistance and a bond that stands up to sun, rain and foot traffic, it is the reliable way to keep synthetic turf flat and secure – and it is backed by a 10 year guarantee. This handy 1 litre can is ideal for smaller lawns, edges, joins and repair work.Where to use itDesigned primarily for outdoor projects such as synthetic lawns, pool surrounds, balconies, courtyards and boat decks, and equally suitable for indoor applications like covered patios and utility areas. It bonds securely to concrete, clean paved surfaces, suitably prepared metal, sanded fibreglass and timber.How to useEnsure the surface is clean, dry and free of dust, oil and loose material. Spread the adhesive evenly with a suitable notched spreader or trowel at approximately 3m² per litre, then lay the grass or carpet into the wet adhesive, smoothing outwards to remove air pockets. Weight or roll the surface while the adhesive develops strength and avoid heavy traffic until fully cured.Important notesDo not apply in extremely hot or cold conditions – work between 10°C and 30°C – and never apply when dew or rain is imminent, as moisture can affect bond development before cure.Specifications Size 1 litre can Colour Green Coverage Approx. 3m² per litre Suitable coverings Artificial grass, outdoor carpet, marine carpet Substrates Concrete, pavers, prepared metal, sanded fibreglass, timber Guarantee 10 year guarantee SafetySolvent-based adhesive: use only in well-ventilated areas, keep away from heat, sparks and open flames, and avoid breathing vapours. Wear gloves and eye protection, replace the lid when not in use and keep out of reach of children. Refer to the safety data sheet before use.
$35.99
Dunlop Trade Resaflex is a multipurpose, rubber modified tile adhesive from Dunlop Trade (ARDEX Australia), trusted by professional tilers for decades. Its rubber modified cement formulation delivers a strong yet flexible bond that tolerates normal building movement, and its C2S1 classification confirms improved adhesion and deformability. One bag covers a wide range of everyday tiling jobs, which is exactly why it has earned its multipurpose name.Where to use itSuitable for indoor and outdoor walls and floors. Use it to fix ceramic tiles, fully vitrified tiles, mosaics, porcelain and natural stone (excluding moisture sensitive stone) over compressed fibre-cement sheet floors, concrete floors, fibre-cement sheet walls, Dunlop Undertile Waterproofing, plasterboard and render. It can also be used over Dunlop Waterproofing and green screed, making it well suited to bathrooms and new-build wet areas.How to useMix the powder with clean water to a smooth, lump-free paste. Spread onto a clean, dry, sound substrate with a 6-8mm notched trowel for tiles up to 250 x 250mm, or a 10-12mm notched trowel for larger tiles. Bed each tile with a firm twisting action to achieve full contact, and lift a tile occasionally to check coverage. Allow the adhesive to cure before grouting.Important notesNot suitable for moisture sensitive natural stone. Only mix what can be used within the working time and never re-temper stiffened adhesive with extra water.Specifications Size 20kg bag Colour Grey Coverage 0.65m²/kg (6-8mm trowel); 0.4-0.5m²/kg (10-12mm trowel) Tile types Ceramic, vitrified, mosaics, porcelain, non-sensitive natural stone Substrates Concrete, compressed FC floors, FC walls, waterproofing, plasterboard, render Classification C2S1 rubber modified tile adhesive SafetyContains cement. Avoid breathing dust, wear protective gloves, clothing and eye protection, and mix in a well-ventilated area. Wash skin after handling and refer to the safety data sheet before use.
$53.15
Dunlop Artificial Grass Adhesive in the value 4 litre can is a high strength, all-weather adhesive from Dunlop Trade (ARDEX Australia) for laying artificial grass, outdoor carpet and marine carpet across larger areas. Formulated with excellent water and heat resistance, it keeps synthetic turf and outdoor floor coverings firmly bonded through harsh Australian conditions, and is backed by a 10 year guarantee. At roughly 3m² per litre, one 4L can covers around 12m² – ideal for full lawns, entertaining areas and commercial installs.Where to use itBuilt for outdoor projects – synthetic lawns, pool surrounds, balconies, rooftops, courtyards and marine decks – and also suitable for indoor areas such as covered patios. It bonds securely to concrete, clean paved surfaces, suitably prepared metal, sanded fibreglass and timber.How to usePrepare a clean, dry, dust-free surface. Spread the adhesive evenly using a suitable notched spreader or trowel, working in sections you can cover while the adhesive is wet. Lay the grass or carpet into the adhesive, smooth outwards to expel trapped air, then roll or weight the surface. Keep traffic off until the adhesive has fully cured.Important notesDo not use in extremely hot or cold conditions – apply between 10°C and 30°C – and do not apply when dew or rain is expected before the adhesive has set. Ensure joins are well supported and seams glued continuously for a lasting result.Specifications Size 4 litre can Colour Green Coverage Approx. 3m² per litre (about 12m² per can) Suitable coverings Artificial grass, outdoor carpet, marine carpet Substrates Concrete, pavers, prepared metal, sanded fibreglass, timber Guarantee 10 year guarantee SafetySolvent-based adhesive: ensure good ventilation, keep away from ignition sources and avoid inhaling vapours. Wear protective gloves and eye protection, reseal the can after use and store away from children. Consult the safety data sheet before use.
$97.56
Dunlop Tiler's Mastic is a premium non-slump tile adhesive for walls and floors from Dunlop Trade (ARDEX Australia). Built for the demands of modern tiling, its high-grab, non-slump formula is ideal for today's large format tiles, holding them exactly where you place them on walls while still spreading smoothly and easily on floors. As a C2TES1 classified adhesive it offers extended open time, slip resistance and deformability for a strong, flexible bond.Where to use itSuitable for indoor and outdoor walls and floors, including wet areas over Dunlop Waterproofing. It fixes ceramic, porcelain, non-moisture sensitive natural stone, fully vitrified, mosaic and translucent tiles over cement render, compressed fibre-cement sheet (floors), concrete, Dunlop Undertile Waterproofing, existing ceramic tiles, ceramic tile underlay, fibre-cement sheet (walls) and plasterboard.How to useMix the powder with clean water to a smooth, creamy paste. Trowel onto a clean, dry, sound substrate with a 6 x 6 x 6mm notched trowel for walls or a 10 x 10 x 10mm notched trowel for floors and large tiles. Bed tiles with a firm twisting action, checking contact coverage regularly. Grout after approximately 24 hours.Important notesNot suitable for moisture sensitive natural stone. Ensure substrates are properly prepared and primed where required, and avoid tiling in extreme temperatures.Specifications Size 20kg bag Colour White Coverage 10m² with 6mm notched trowel; 6m² with 10mm notched trowel Tile types Ceramic, porcelain, non-sensitive stone, vitrified, mosaics, translucent Substrates Render, concrete, compressed FC sheet, waterproofing, existing tiles, plasterboard Classification C2TES1 tile adhesive SafetyContains cement – avoid breathing dust and avoid skin and eye contact. Wear protective gloves, clothing and eye protection, and mix in a well-ventilated area. Consult the safety data sheet before use.
$40.28
Dunlop Tiler's Rubber Modified is a flexible, rubber modified tile adhesive for walls and floors from Dunlop Trade (ARDEX Australia). The rubber modified formulation gives the cured bond extra flexibility to absorb normal substrate movement, while its generous coverage and 6-hour grout time keep jobs moving. Classified C2S1, it is a dependable workhorse for tilers who need strength, flexibility and speed in one bag.Where to use itSuitable for indoor and outdoor walls and floors. It fixes ceramic tiles, fully vitrified tiles, mosaics, porcelain and natural stone (excluding moisture sensitive stone) over compressed fibre-cement sheet floors, concrete floors, ceramic tile underlay, fibre-cement sheet walls, Dunlop Undertile Waterproofing, plasterboard and render. It can even be used over Dunlop Waterproofing and green concrete, making it handy on fast-track projects.How to useMix with clean water to a smooth, creamy consistency and allow to slake before remixing. Apply to a clean, sound, dust-free substrate using a 6 x 6 x 6mm notched trowel on walls or a 10 x 10 x 10mm notched trowel on floors. Press tiles in firmly with a twisting action and check adhesive transfer on the tile back. Grouting can begin in as little as 6 hours.Important notesNot suitable for moisture sensitive natural stone. Do not add extra water once the mix begins to stiffen, and avoid application in extreme temperatures.Specifications Size 20kg bag Colour Grey Coverage 14m² with 6mm notched trowel; 8m² with 10mm notched trowel Tile types Ceramic, vitrified, mosaics, porcelain, non-sensitive natural stone Substrates Concrete, compressed FC floors, FC walls, CTU, waterproofing, plasterboard, render Classification C2S1 tile adhesive; grout in 6 hours SafetyContains cement. Avoid generating and breathing dust, wear protective gloves, clothing and eye protection, and mix in a well-ventilated space. Refer to the safety data sheet before use.
$47.18
Dunlop Super Tileset Plus is a smooth, creamy cement-based wall and floor tile adhesive from Dunlop Trade (ARDEX Australia). Mixing to a workable, easy-spreading consistency, it delivers dependable adhesion for everyday tiling at an economical price, making it a solid choice for renovators and trade users tackling standard wall and floor jobs.Where to use itApproved for both indoor and outdoor use on walls and floors. It suits bathrooms, kitchens, laundries, living areas and patios, and bonds ceramic, porcelain, mosaics, fully vitrified, translucent tiles and natural stone (excluding moisture sensitive stone) over concrete, render, screeds, Dunlop Waterproofing Membranes, fibre-cement sheets and plasterboard.How to useMix the powder with clean water to a smooth, lump-free paste and allow it to stand briefly before remixing. Spread onto a clean, dry, sound substrate with a 6mm notched trowel for walls and smaller tiles, or a 10mm notched trowel for floors and larger formats. Bed tiles firmly with a twisting action and check coverage on the tile back periodically. Grouting can proceed after approximately 24 hours at 23°C and 50% relative humidity.Important notesDo not tile over moisture sensitive natural stone with this adhesive, and avoid tiling in extreme temperatures or onto frozen or saturated substrates. Only mix as much adhesive as can be used within its working time.Specifications Size 20kg bag Colour Off-white Coverage 9m² per 20kg (6mm trowel); 6m² per 20kg (10mm trowel) Tile types Ceramic, porcelain, mosaics, vitrified, translucent, non-sensitive stone Substrates Concrete, render, screeds, Dunlop membranes, FC sheet, plasterboard Classification Exceeds C1 Australian Standard SafetyContains cement. Avoid breathing dust and avoid contact with skin and eyes – wear protective gloves, clothing and eye protection when mixing and applying. Mix in a well-ventilated area and refer to the safety data sheet before use.
$36.00
Dunlop Wall & Floor Tile Adhesive is a high performance, ready-mixed adhesive from Dunlop Trade (ARDEX Australia) that takes the hassle out of fixing most tile types. Supplied in an easy-to-handle 8kg pail, it is specially formulated to bond ceramic, porcelain, mosaics, fully vitrified tiles and natural stone (excluding moisture sensitive stone), and its highly flexible formulation copes with the small movements that occur in everyday walls and floors.Where to use itSuitable for indoor walls and floors, and outdoor areas provided there is no standing water and sufficient fall for run-off. It bonds over an impressive range of surfaces: cement render and concrete, fibre-cement sheets, existing ceramic and vinyl tiles, Dunlop Undertile Waterproofing, prepared metal surfaces, oil-based painted surfaces, plasterboard and suitably prepared interior timber.How to useMake sure the substrate is clean, dry and free of dust or grease. Spread the adhesive with a 6-8mm notched trowel for tiles up to 250 x 250mm, or a 10-12mm notched trowel for larger tiles, then bed tiles in firmly with a twisting motion. Work in small sections so a skin does not form before tiling.Important notesDo not use over strip timber floors. Prime particleboard and plywood sheet floors with Dunlop Tile-All before tiling. For fully immersed or pool applications choose a cement-based Dunlop adhesive instead.Specifications Size 8kg pail Colour Grey Coverage 0.8m²/kg (6-8mm trowel); 0.5m²/kg (10-12mm trowel) Tile types Ceramic, porcelain, mosaics, fully vitrified, natural stone (non moisture sensitive) Substrates Concrete, render, FC sheet, existing tiles, vinyl, metal, plasterboard, prepared timber Format Premixed dispersion adhesive SafetyWork in a well-ventilated area, wear gloves and eye protection, and avoid prolonged skin contact. Wash tools and hands with water before the adhesive dries. Keep out of reach of children and consult the SDS before use.
$93.46
Dunlop Express Wet Area Tape is a self-adhesive waterproofing joint tape that seals the most leak-prone parts of a wet area, the joints where floor meets wall, and around shower grates and outlets. Simply peel and stick: no messy fillets, no waiting for a bond breaker to cure. Paired with Dunlop Express Wet Area Waterproofing membrane it forms a rapid, complete waterproofing system that lets tiling commence just four hours after the membrane goes on.Where to use itSuitable for indoor and outdoor wet areas including bathrooms, showers, laundries and balconies. It performs over AAC blocks, fibre-cement sheet, concrete, renders, screeds and wet area grade plasterboard.How to useMake sure surfaces are clean, dry and dust-free. Peel the backing and press the tape firmly along floor/wall junctions, corners and around penetrations such as shower grates and outlets. Where two lengths of tape meet, overlap them by a minimum of 15mm. Then apply Dunlop Express Wet Area Waterproofing membrane over the taped joints and the rest of the area as normal.Important notesA standard shower recess with 1.8m high walls needs roughly 7m of tape, so one 10m roll comfortably covers a typical shower. Used with the Express membrane, the system meets Australian Building standards for wet area waterproofing.Specifications Size 80mm x 10m roll Colour Grey Overlap Minimum 15mm at joins Substrates AAC, fibre-cement, concrete, renders, screeds, wet area plasterboard SafetyLow-hazard adhesive tape; use care with cutting tools and follow the safety directions of the waterproofing membrane applied over it.
$65.28
Dunlop Express Wet Area Waterproofing is a high performance, water-based acrylic polyurethane membrane built for speed. Its high-build consistency lets you brush on a thick, even film that reaches the required membrane thickness with ease, and when used with Dunlop Express Wet Area Tape you can start tiling just four hours later. This handy 1kg tub is ideal for small repairs, patching and touch-up work, and it is backed by a 10 year guarantee.Where to use itUse indoors or outdoors in wet areas: showers, bathrooms, laundries and balconies. It adheres to AAC blocks, fibre-cement sheet, concrete, renders, screeds and wet area grade plasterboard on walls and floors.How to usePrime the clean, dry substrate, seal junctions and penetrations with Dunlop Express Wet Area Tape, then brush on the first coat of membrane. Once dry, apply a second coat at right angles to the first until the required thickness is achieved. Tiling can commence after 4 hours when the full Express system is used. Wash brushes in water immediately after use.Important notesWaterproofing has minimum application requirements under AS3740: after two coats the dry film must be 1mm thick on floors and 0.5mm on walls. Check local council specifications before you begin. The membrane is a Class III membrane to AS/NZS4858.Specifications Size 1kg tub Coverage Up to 0.84m² on walls or 0.42m² on floors Colour Blue/Grey Tile after 4 hours (with Express Wet Area Tape) SafetyVentilate the area, wear gloves and eye protection, and avoid skin contact. Keep away from children and consult the Safety Data Sheet before use.
$43.00
Dunlop Express Wet Area Waterproofing in the 20kg pail is the full-bathroom format of Dunlop's fast-track membrane. This high performance, water-based acrylic polyurethane formula offers superior workability and a high-build film that reaches the required thickness without endless coats. Combined with Dunlop Express Wet Area Tape, the system lets tiling commence in as little as four hours, and it carries a 10 year guarantee.Where to use itMade for indoor and outdoor wet areas: showers, bathrooms, laundries and balconies. Apply it over AAC blocks, fibre-cement sheet, concrete, renders, screeds and wet area grade plasterboard, on walls and floors.How to usePrime the substrate with the appropriate Dunlop primer, seal all floor/wall junctions, corners and penetrations with Dunlop Express Wet Area Tape, then brush the membrane on generously. When the first coat is dry, brush on a second coat at right angles to the first to build the required film thickness. Tiling can begin after 4 hours when the complete Express system is used. Tools clean up in water while wet.Important notesAS3740 requires a minimum dry film thickness after two coats of 1mm on floors and 0.5mm on walls; confirm requirements with your local council. Certified as a Class III membrane to AS/NZS4858 and conforming to AS3740-2010 Wet Area Membranes.Specifications Size 20kg pail Coverage Up to 17m² on walls or 8.5m² on floors Colour Blue/Grey Tile after 4 hours (with Express Wet Area Tape) SafetyWork with good ventilation, wear gloves and safety glasses, and avoid contact with skin and eyes. Store sealed, away from children, and read the Safety Data Sheet first.
$313.95
Dunlop Rapid Bond Coat is a water-based bonding coat that creates a chemical key on smooth, dense, non-porous surfaces, the ones ordinary primers struggle to grip. Applied before Dunlop adhesives, floor levelling compounds or Dunlop undertile waterproofing membranes (in non-immersed situations), it transforms slick substrates such as glazed tiles into a surface your next product can actually hold onto. It is the product that makes tile-over-tile renovations possible without demolition, and its rapid-drying formula keeps the job moving.Where to use itSuitable for indoor and outdoor use on walls and floors. Use it over glazed tiles, concrete, renders, screeds, masonry, AAC block, fibre-cement and compressed fibre-cement sheet, Scyon and internal sheet timber.How to useClean the surface thoroughly, degreasing glazed or dense substrates so nothing interferes with the bond. Apply a thin, even coat by brush or roller and allow it to dry before applying your adhesive, leveller or membrane. Being water-based, wet product cleans off tools with water.Important notesRapid Bond Coat is designed for smooth, dense and difficult non-porous substrates; for ordinary porous surfaces use Dunlop Multipurpose Primer instead. When used under waterproofing it is for non-fully-immersed applications only. Coverage varies with the substrate and application method.Specifications Size 1 litre Coverage Approx. 10m² per litre Substrates Glazed tiles, concrete, renders, screeds, masonry, AAC block, fibre-cement, Scyon, internal sheet timber Drying Rapid drying SafetyVentilate the room, wear gloves, and avoid contact with eyes and skin. Store the sealed bottle away from children and check the Safety Data Sheet before use.
$67.73
Dunlop Undertile Waterproofing is a hard-wearing, highly flexible liquid membrane that forms a seamless waterproof barrier beneath tiles. Brushed on straight from the pail, its ready-mixed blue formula makes it easy to see your coverage as you build the film, and once cured it protects the structure beneath showers, laundries and balconies from moisture damage for the long haul.Where to use itDesigned for indoor wet areas such as showers, bathrooms and laundries, as well as balconies. It bonds to AAC blocks, bricks, concrete, renders, screeds, fibre-cement sheet, marine plywood and wet area grade plasterboard on both walls and floors.How to usePrime the prepared surface with the appropriate Dunlop primer, then brush on the first coat of membrane, embedding Dunlop Reinforcing Mat into wall/floor junctions, corners, hobs and joints while it is wet. Once the first coat has dried, apply a second coat at right angles to the first to reach the required film thickness, then tile over it with a compatible Dunlop tile adhesive.Important notesAustralian Standard AS3740 sets minimum membrane thicknesses: after two coats, the dry film must be at least 1mm on floors and 0.5mm on walls. Check your local council requirements before starting. The membrane is certified to AS4858 and AS4654.Specifications Size 12.5kg pail Coverage Approx. 10m² on walls or 4.5m² on floors per pail Substrates AAC, brick, concrete, renders, screeds, fibre-cement, marine plywood, wet area plasterboard Colour Blue SafetyEnsure good ventilation, wear gloves and safety glasses, and avoid skin and eye contact. Keep the pail sealed and stored away from children. Read the Safety Data Sheet before application.
$142.94
Dunlop Multipurpose Primer in the 4 litre pack is the job-sized version of Dunlop's water-based bonding primer, made for whole-room and whole-house preparation work. It improves the bond between the substrate and Dunlop floor levellers, renders, tile adhesives and waterproofing membranes, turning dusty, porous surfaces into a reliable base. It suits new and old concrete, particleboard and compressed fibre-cement sheets alike.Where to use itUse indoors or outdoors, on walls and floors. It is at home on fibre-cement sheeting, concrete slabs, masonry and lightweight concrete blocks, particleboard, renders and screeds, before levelling, rendering, tiling or waterproofing with Dunlop systems.How to usePrepare the surface so it is clean, dry and free of dust, grease and loose material. Pour out the primer and spread an even coat with a brush or roller, working it into the surface. Let it dry clear before applying the next product in your system. Wash tools in water immediately after use.Important notesOn very porous substrates a second coat is required to achieve a continuous primed film. The white-on, clear-dry formula shows exactly where you have coated. Actual coverage depends on substrate porosity and site conditions.Specifications Size 4 litres Coverage Approx. 6m² per litre (up to approx. 24m² per pack) Substrates Fibre-cement, concrete, masonry, lightweight blocks, particleboard, renders, screeds Colour Applies white, dries clear SafetyWear gloves and eye protection, keep the work area ventilated, and avoid prolonged skin contact. Keep away from children and refer to the Safety Data Sheet before starting.
$60.26
Dunlop Ardit Crack Filler is a high strength, two-part hybrid polyurethane that repairs cracks and spalls in concrete almost instantly. With a viscosity similar to water, it flows deep into cracks that pastes and mortars can't reach, then cures harder than the surrounding concrete within an hour. Driveable repairs are possible in as little as 20 minutes, making it a genuine problem-solver for busy floors and driveways.Where to use itSuitable for indoor and outdoor concrete - garage floors, driveways, paths, warehouse slabs and patios. Because the two parts mix automatically through the nozzle, it is equally at home in a professional toolkit or a weekend repair kit.How to useClean the crack thoroughly, removing dust, loose material and any moisture. Load the 254ml dual cartridge into a suitable applicator gun, attach the self-mixing nozzle and dispense directly into the crack until full. For wider spalls and larger repairs, blend in clean, dry bagged aggregate to bulk the fill. The repair sets stronger than concrete in about 1 hour and takes vehicle traffic after roughly 20 minutes.Important notesNew concrete must be fully cured - at least 28 days old - before application. The water-thin consistency is designed for penetrating cracks, so dam or tape the ends of through-cracks where needed. Used nozzles cannot be reused once the product sets.Specifications Size 254ml dual cartridge Coverage Depends on crack width and depth Thickness Flows to full crack depth; add aggregate for large voids Substrates Concrete Set time Drive on after 20 minutes; full strength in 1 hour SafetyReactive polyurethane resins can irritate skin and airways before curing. Wear nitrile gloves and safety glasses, work in a well-ventilated area, avoid skin contact with uncured product and keep it away from children. Dispose of cartridges according to local regulations.
$67.48
You have seen 240 out of 497 products
Products suited to outdoor environments. Choose sealants, adhesives and accessories that match moisture, temperature and movement demands in outdoor areas. Look for mould resistance, flexibility, UV stability or potable‑water suitability where shown. Use the filters to narrow by material, chemistry, cure speed, temperature rating, and clean‑up. Always check the product page and TDS/SDS for suitability and instructions.
